Page 324 - byob-catalog

322
ENGINE ACCESSORIES
Shaft Packing & Accessories
Marine Wet Exhaust Tubing Listed 699A
FIG3276 CEN
Vernatube Exhaust Tubing
Part No.
1100501-10
1100502-10
1100503-10 1100504-10 1100505-10 1100506-10 1100507-10 1100508-10 1100509-10 1100512-10 1100515-10 1100521-10 1100525-5 1100523-10 1100524-10
O.D. (INCHES)
2-1/2
3
3-1/2 4 4-1/2 5
6
8 10 2 12 1-1/2 1 1-3/4 1-7/8
LENGTH (FEET)
10
10
10 10 10 10 10 10 10 10 10 10 10 10 10
mfr
Fire-retardant, filament-wound tubing for long or short exhaust runs. Centek fiberglass exhaust tubes are made from corrosion-resistant, high- temperature resin and E-Glass. Tubes offer plenty of strength for clamping and feature precise outer diameters and a semi-smooth surface for easy hose connection and a tight seal.
Part No.
1100203-10
1100204-10
1100209-10
1100211-10
1100216-10
Hotshield Muffler/Manifold Wrap
Foil Back
I.D. (INCHES)
2
1.5
1-3/4
3
2.5
O.D. (INCHES)
2-1/2
2
2-1/4
3-1/2
3
LENGTH (FEET)
10
10
10
10
10
mfr
CEN
Shaft Log/Rudder Post Housing
Centek uses the same basic filament winding process for both Vernatube exhaust
heavy duty fiberglass tubing. By winding additional layers of resin impregnated, continuous fiberglass strands in a predetermined pattern, wall thickness and strength are dramatically increased. This results in strength to weight ratios greater than conventional metal structures.
tubing and
These quality fiberglass muffler/manifold wraps are for small heat sensitive jobs. They are a class ”E” cloth with reinforced polyester resin and have a foil backing. 20009 and 20010 are 100 ft. rolls and 20026 is a 25 ft. roll.
This wire is available in (2) sizes, .032 and .041. The 30085 and 30086 wires are available in 10 ft. coils. The .032 30087 feeder box has 340 ft. and the .041 30088 feeder box has 225 ft.
Part No.
20009 20010 20026
mfr
MET
Size
1/8” x 2” x 100 ft. 1/16” x 3” x 100 ft. 1/16” x 3” x 25 ft.
Temp.
Limit Case
900° 6 900° 6 900° 6
Part No.
30085 30086 30087 30088
Size
.032 S/S Wire .041 S/S Wire .032 S/S Wire .041 S/S Wire
Std. Roll
10 ft.
10 ft. 340 ft. (1 lb.) 225 ft. (1 lb.)
302-304 Stainless Steel Locking Wire
WPT FIG 3451
30088
FIG1122 WPT
mfr
30087
mfr
Part No.
4 5 6 8 10 12
Description
4” Stainless Steel Crush Sleeves 5” Stainless Steel Crush Sleeves 6” Stainless Steel Crush Sleeves 8” Stainless Steel Crush Sleeves 10” Stainless Steel Crush Sleeves 12” Stainless Steel Crush Sleeves
FIG 3277
Part No.
20001 20003
Size Limit
1/8”x2” 750°F 1/8”x3” 750°F
Case – 6
SOLD BY FULL ROLL ONLY
Roll
100 ft. 100 ft.
Stainless Steel Crush Sleeves
Connecting Fiberglass Tube to Hose
E-Glass Thermal Tape
mfr
WPT FIG 3491
For muffler or manifold wrapping.
Temp. Std.
These Crush Sleeves are made of highest quality 14-gauge 316L stainless steel. These sleeves are inserts for fiberglass tubing to prevent ends of tubing from being crushed due to over-tightening of clamps and extreme temperatures.
Crush sleeves are designed for Centek glass inside diameter and are 3” wide.
MUFFLER & EXHAUST