Page 967 - LMS_Catalog_65
P. 967

 ENGINE ACCESSORIES
955
 Carburetor Float and Hinge Pin Kit
Edelbrock #1469 EPS And Thunder Series AVS Float kit (Includes Two Floats, Two Pins And A Float Setting Gauge)
Part No.
BRK 1469
Choke Cap Kit for Performer & Thunder
Series AVS Carburetors
mfr Electric Carburetor Choke BRK
Designed to convert manual choke Edelbrock Performer series carburetor to electric choke. This kit includes all necessary parts to convert #1404, #1405, #1407 and #1412 carbs to electric choke. Part No.
mfr
BRK
Edelbrock Carburetors & Kits
    BRK 1478
  Choke Cap Kit includes all the components needed to replace the existing choke cap on all Edelbrock square bore carbs.
Part No.
BRK 1474
Bolt Kit for All QuadraJets
Comes with four 5/16” bolts needed to install a Quadra jet carburetor, except Part No. 1905.
Part No.
mfr
BRK
     BRK 1925
mfr
BRK
Performer Intake Manifold
mfr
BRK
Designed for street 1955-86 small-block Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads.
  Performer Intake Manifold, Black Finish
Designed for street 262-400 c.i.d. Chevy V8’s that have heads with canted center bolt holes, 1987-1995. This Manifold accepts late-model water neck, air-conditioning, alternator, H.E.I., has rear water crossovers and accepts exhaust-heated chokes. For 1987-95 stock aluminum heads use #2101. Will not fit Chevrolet Bowtie or LT1 heads. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Part No.
BRK 21043
Performer RPM 4V/Q-JET
Marine Intake Manifold
Designed for 1987-95 262-400 c.i.d. Chevy V8’s for spread-bore (Q-Jet) or square- bore carbs. The Edelbrock Performer RPM Q-Jet #2506 intake manifold is designed specifically for demanding marine applica- tions and delivers maximum power and a broad torque curve for high-performance marine. Delivers maximum power and a broad torque curve for high-performance marine. Carb pad will accept square-bore carbs without adapters. The Performer RPM Q-Jet marine intake manifold features brass lined front water crossover and brass flange inserts to cover the rear water openings. Part No.
BRK 2506
mfr
BRK
Exhaust Valves for #60669 & 60689
mfr
BRK
Part No.
BRK 2101
Performer Carburetor
Calibration Kit mfr
 Edelbrock Performer carburetor calibration kit.
Part No.
BRK 1479 for EPS 1405
BRK 1488 for EPS 1409
BRK
     Single Feed Fuel Line
Chrome w/ Polished Filter
The Edelbrock #8131 includes a polished aluminum fuel filter with a 40-micron filter element and -6 AN male inlet will accept an Edelbrock fuel line kit for a complete fuel pump to carburetor plumbing solution. The Edelbrock #8131 is manufactured of plated steel and include a 5/8” -20 threaded banjo bolt with gaskets.
Part No.
BRK 8131
mfr
BRK
       mfr
BRK
Cylinder Heads
The Edelbrock Square-Bore to Spread-Bore Adapter #2732 adapts BRK square-bore carbs to spread-bore carb pad on Edelbrock intakes.
Part No.
BRK 2732
Carburetor Heat Insulator Square Bore
mfr
BRK
The Edelbrock Square-bore Heat Insulator Gasket #9266 is designed to prevent percolation on Edelbrock Performer Series carburetors exposed to extreme under hood temperatures.
Part No.
BRK 9265
Edelbrock Victor 351-Y Intake Manifold
mfr
BRK
Intake Manifold, Victor 351-Y, Single Plane, Aluminum, Natural, Square Bore, Ford, 351C, Sold Each
Part No.
BRK 2991
The Edelbrock #93664 Exhaust Valves are 1-piece, swirl- polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32” except where noted.
Part No.
BRK 93664
Carb Adapter for Edelbrock Manifolds Only, Square Bore-Spread Bore
mfr
 CARBURETOR & INTAKES

















   965   966   967   968   969