Page 966 - LMS_Catalog_65
P. 966

 954
ENGINE ACCESSORIES
 Edelbrock Carburetors & Kits
 600 CFM, Square-Flange Electric Choke
mfr Valve Covers BRK
Elite, Centerbolt, Stock Height, Aluminum, Polished, Ribbed with Logo, Chevy, 5.0L, 5.7L, Pair
Part No.
BRK 4246
Elite Series, Tall Profile, Alu- minum, Polished, Chrysler, Dodge, Plymouth, Small Block, Pair
Part No.
BRK 4295
Elite Series, Tall Profile, Alu- minum, Polished, Ribbed, Edelbrock Logo, Chevy, Big Block, Pair
Part No.
 For use with Edelbrock Performer manifolds and others of similar design in marine applications. Complies with U.S. Coast guard safety standards. Cast surfaces are iridited and shaft and pump arm are Teflon coated for maximum corrosion protection. Other features include modified bowl venting, specially designed throttle shaft, accelerator pump seal, 3/8'' inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent, 5-1/8'' flame arrestor flange, uni- versal throttle lever and a revised secondary system for improved transient performance. Comes with the following jets, rods and springs: Metering Jets: Primary .098, Secondary .101; Metering Rods: .068 x .047. Step-Up Springs: orange (5'' Hg).
Part No. BRK 1409
750 CFM, Square-Flange Electric Choke
For use with Edelbrock Performer RPM and Torker II manifolds and others of similar design in marine applications. Complies with U.S. Coast Guard safety standards. Cast surfaces are iridited; shafts and pump arm are Teflon coated for maximum corrosion protection. Other features include: modified bowl venting, specially designed throttle shafts, accelerator pump seal, 3/8'' inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent, 5-1/8'' flame arrestor flange, universal throttle lever and revised secondary system for improved transient performance. Comes with the following jets, rods and springs: Metering Jets: Primary, 113, Secondary. 107; Metering Rods: .071 x .047 Step-Up Springs: orange (5'' Hg).
mfr
BRK
         Part No. BRK 1410
Performer Carburetor
600 CFM w/ Electric Choke
The Edelbrock 1400 Performer Series
600 CFM electric choke carburetor is a
precisely tuned, quality-built carburetor
that can handle the rigors of daily driving
while delivering consistent, reliable
street performance from day to day. mfr Part No. BRK 1400 BRK
mfr BRK 4280 BRK
4 bbl. Quadrajet Adapter (.750'')
mfr
BRK
Mounts 4-bbl. Rochester Quadrajet carburetors to square-bore, single-plane manifolds.
Part No.
BRK 2692
  Carburetor Rebuild Kit
mfr
BRK
Includes all parts and gaskets necessary to rebuild Edelbrook Square-Bore Carbs.
Part No.
BRK 1477
    Performer Carburetor
600 CFM w/ Manual Choke
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can han- dle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. Part No. BRK 1405
Four-hole, Square-bore to Spread-bore Adapter (.850' thick)
Mounts Edelbrock square-bore carbs to stock Quadrajet & Thermo-Quad manifolds.
Part No.
BRK 2696
Marine intake manifold for Chevy V6 - V8
mfr
BRK
Insulator Gasket
mfr
BRK
 Designed to help prevent fuel percolation in Performer Series Carbu- retors exposed to extreme temperatures. #9266 features a divided center which is designed to seal the carburetor
to dual-plane Performer and Performer RPM
manifolds. All gaskets come with extended carb studs. Divided Square-Bore Heat Insulator Gasket (0.32” Thick).
Part No.
    BRK 9266
   (With Brass Insert)
mfr BRK 2516 is designed for use with 262-400 BRK c.i.d. Chevy V8 marine engines with 1996-later Vor(L31) cast iron heads. Accepts square-bore and spread-bore carbs. Requires Edelbrock bolt
kit #8504 and electric choke carb.
BRK 2504 is for use with 1955-86 262-400 c.i.d. Chevrolet V8’s with spread-bore (Q-Jet) or square-bore carbs. Carb pad will accept square- bore carbs without adapters.
BRK 2561 is ideal for 396-502 c.i.d. Chevrolet V8’s with oval-port cylinder heads.
Has no provisions for exhaust heated chokes. Accepts square-bore & spread-bore carbs.
BRK 2519 is designed specifically for use on 1996-present Chevy 4.3L V6 Vorengines. Eight holddownbolts.
 CARBURETOR & INTAKES
 































   964   965   966   967   968