Page 932 - LMS_Catalog_65
P. 932

  ENGINE ACCESSORIES
BETTER THAN THE OEM PROPELLER
*Note: To find the correct installation kit and propeller housing, locate the HP, gearcase size, and prop shaft spline count of your outboard or sterndrive.
AN INSTALLATION KIT IS REQUIRED   FOR PROPS LISTED TO THE RIGHT
920
      90-300+hp
ENGINES WITH A
4.75” GEARCASE
500 Series Installation Kits
Use on engines under 200hp with aluminum or stainless steel props or engines 200hp and above with aluminum props only.
700 Series Installation Kits Engineered For Big HP
Use on engines 200hp and above with stainless steel props.
500 & 700 Series Installation Kits
Premium corrosion resistant brass splines. Eliminate hub system vibration & chatter. Reduce gear shock & engine/drive damage. Reduce prop replacement cost by up to 50%.
500 & 700 Series MasterGuard Installation Kits & Corresponding Prop Housings are Compatible with, and Upgrade Compet- itors’ Hub & Prop Systems. Interchange-
®®
able with Mercury Flo-Torq II , Michigan
®®®
Wheel XHS , Solas RubexTM hub kit sys-
tems. NOTE: Not applicable with Turning Point’s 10, 20 and 200 Hub Kit series.
MasterGuard Kits include a Lifetime Warranty
   Engine Brand - Various Splined Prop Shafts
Kit
Part #
Each
    EVINRUDE® &JOHNSON®:
V4 with V6 large gearcase: 100hp commercial, 120hp ('85),130hp ('95-'96), 140hp ('85), Pleasure ('95+): 115hp, 130hp /
H.O. (includes E-TEC H.O.): (25” shaft) 90, 115, 135, 150, 200, 225, 250hp E-TEC(includespontoonseries-notforE-TECG2): 90hp(25”shaft),115hp,130hp('09-'10), 135hp to 300hp / V6: 135hp to 250hp /
V8: 250hp to 300hp
711
11500200
 11701100
$58.00
  EVINRUDE® E-TEC® G2TM:(15splineshaft)
Note: Use 711 Super Duty Kit for 200+hp Engines w/ SS Props. G2 Series Only: 150 to 300hp
502
511 11501100 $73.00
$58.00
   HONDA®: (15 spline shaft)
Note: Use 708 Super Duty Kit for 200+hp Engines w/ SS Props. BF115D ('11+), BF135 ('04+), BF150 ('04+), BF200 ('02+),
BF225 ('02+), BF250 ('12+)
508 11500800 $58.00
JOHNSON®: (use Express Mach3 OS series props only) 4 stroke: 200hp, 225hp
708
707
701
11700800
11700700
$79.00
   $84.00
   MERCURY® & MARINER®: (15 spline shaft)
Note1: Use 701 Super Duty Kit for 200+hp Engines w/ SS Props. Note2:115hpProXSCTOnly; ForProXS&Veradow/1.25”propshaft,useMercury Solid Hub kit with the Turning Point Prop.
FourStrokeTM & SeaProTM: 90CT, 115CT, 150hp, 200 to 300 /
V6: 135 to 300hp /
Verado 135 to 300hp(not HD) / OptiMax: 150, 200, 250hp
501 11500100
$58.00
11700100
$79.00
   MERCRUISER®: (15 spline shaft)
Note1: Use 701 Super Duty Kit for 200+hp Engines w/ SS Props. Note2: If propeller strikes trim tab, replace with Mercury part #822777A1 Alpha One and Bravo One ('83+)
501 11500100 $58.00
701
707
707
11700100
11700700
$79.00
   OMC®: Note: SX drives, see Volvo Penta listing below.
Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502, 7.4-8.2L ('90+) / Sea Drive: 2.0 to 502 4.0L
SUZUKI®: (15 spline shaft) 507 Note: Use 707 Super Duty Kit for 200+hp Engines w/ SS Props. DT 2 stroke: 150hp
to 225hp
11500200
11500700
$58.00
$62.00
  $84.00
   SUZUKI®: (15 spline shaft)
Note: Use 707 Super Duty Kit for 200+hp Engines w/ SS Props. (use Express Mach3 OS series props only) DF 4 stroke: 150 to 300hp
507 11500700 $62.00
11700700
$84.00
   TOHATSU®: (15 spline shaft)
Note: Use 708 Super Duty Kit for 200+hp Engines. BFT115, BFT150, BFT200, BFT225, BFT250
508 11500800 $58.00
VOLVO® PENTA SX & OMC SX COBRA: (19 spline) ('94+): 3.0 to 8.2L. NotforVolvoDuoProporAquamaticdrives. VOLVO® PENTA AQ: (17 spline)
(use 4 blade props only) 200, 250, 270, 280, 290 YAMAHA®: (15 spline shaft)
Note1: Use 705 Super Duty Kit for 200+hp Engines w/ SS Props.
Note2: If Express Mach3 OS Prop strikes trim tab, replace with Yamaha part #6E5- 45371-10-00 or Turning Point part #41505060.
2 and 4 stroke: 150 to 250hp / F300 (V6 only '09+) /
Sterndrives 3.0 to 7.4L
504 11500400
510 11501000
505 11500500
$58.00
$73.00
$58.00
708
705
11700800
11700500
$79.00
       $79.00
   YAMAHA®: (use Express Mach3 OS series props only) F350
715
11701500
$99.00
            MACH3
®
OS
The New Express® Mach3TM OSTM Series of Stainless Steel Propellers are the next step in the evolution of our very popular larger diameter VO series. Our Engineers and Propeller Experts made improvements to the cup, leading and trailing edges, and the aggressive progressive rake and blade geometry that are Turning Point hallmarks. These modifications have produced
a propeller with excellent hole shot, impressive bow lift, and class leading cornering. The Express Mach3 OS is perfectly matched to large horsepower bay boats, offshore center consoles, and high horsepower pontoons/tri-toons. It will fit all 90hp and larger 4.75” gearcase outboards from all engine manufacturers, and Mercury® Alpha OneTM and Bravo OneTM, and Volvo® Penta® SX sterndrives. Large diameter three blade propellers offer great mid-range fuel economy in many applications. Whether you are looking to maximize your time on the water, extend your cruise range, or just stretch your fuel dollars, the Express Mach3 OS is a great choice to get the most out of your boat.
WARNING: MasterGuard Installation Kits Warning: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
     TP-7
SPARK PLUGS
   930   931   932   933   934