Page 888 - LMS_Catalog_65
P. 888

 876
ENGINE ACCESSORIES
 Oil & Lubricants
   *
   Silicone Dielectric Grease
mfr
SYN
     12004 21030
Synthetic Lubricants
41160
FIG 1998 SYN
A clear non-staining synthetic compound with syncolon (PTFE). Excellent adhesion, will not drip or run. Prevents rust and corrosion, reduces friction. Fresh and salt waterproof. Non-toxic, safe on rubber, plastics, paints and other materials. Works effectively in temperatures from -45° to + 450°. Use on wheel bearings, sailtracks, winches, cables, linkages, fishing reels and for anything that slides, swivels, rolls or squeaks.
Superpull Electrical-Fiber Optic Pulling Compound
31110*
41150
mfr
  Part No.
12004
21010
21030
31040
31110
41150
41160
Description
Air Tool Pneumatic Lubricant
Grease Tube Lubricant
Multi-Purpose Synthetic Grease with Syncolon® (PTFE)
Aerosol Spray Lubricant
Multi-Purpose Synthetic Lubricant with Syncolon® (PTFE) Multi-Purpose Synthetic Grease Nlgi 0 with Syncolon® (PTFE)
1-lb. Grease Can
mfr
SYN
This grease is waterproof and protects against moisture and contaminants in electrical con- nections. Protects battery cables, spark plugs, distributor caps, terminal strips and cable connections.
Part No. Size Case
93003 1 qt. 1
         LanoCote®
Corrosion Inhibitors
LanoCote®: 4 oz jar. Prevents & stops corrosion of metals. Withstands salt water marine conditions on boats & machinery. Part No. 770001
LanoCote®: 8 oz spray - Prevents & stops corrosion of metals. Withstands salt water marine conditions on boats & machinery. Part No. 770007
Standard Oil Drain Kit
Size
4 oz.
1/2 oz.
3 oz.
6 oz.
11 oz.
14.1 oz.
14.1 oz.
FIG 9559
       mfr
MPI
TC-W3 meets the specified requirements of all foreign and domestic 2-cycle outboard manufacturers. Our ashless TC-W3 is formulated from ultra-clean base stock oil to provide superior protection against piston scuffing, bearing wear, spark plug fouling, pre-ignition and rust. This formulation has outstanding lubricity and miscibility for better mixing of fuel and oil, resulting in a cleaner running engine. Contains no phosphorus. Will not void manufacturers’ warranties!
mfr
FOR
mfr
LMC
ACD
 It’s quick and easy to drain engine oil without a pump. Simply push the hose through the transom drain plug hole or place anywhere below oil pan. Assembly includes 42” oil resistant hose with non-corrosive brass fittings. Available in sizes to fit all I/O engines.
Part No.
11590
11591
11592
11593
Description
16 oz. bottle. 12 per master.
Quart bottle. 12 per master.
Gallon container. 6 per master.
2-1/2 gallon container. 2 per master.
Part No.
305-0380 306-0380 307-0380 308-0380 309-0380
Size
1/2”-20 3/8”-18 3/4”-16
12 x 1.75mm 14 x 1.5mm
         mfr
RUL
Oil Changer Seal
This grease is waterproof and protects against moisture and contaminants in electrical connections. Protects battery cables, spark plugs, distributor caps, ter- minal strips and cable connections.
Part No. Size Case
91003 3 oz. 12
B
Consists of a robust self-priming flexible impeller pump mounted to an easy to install base and coupled to a five port manifold, factory fitted with three full flow ball valves. This system includes a pump reversing switch to pump used oil out and new oil in, the cover includes a hinged valve cover to protect them from being accidentally opened, and the valve cover will not close after an oil change unless valves are securely closed. Complies with USCG 183.410 and ISO 8846 Marine (ignition protected). Ball valves - 1/2” NPT. 12 Volt DC, fuse 15 amp.
Part No.
1040-0000
  Good for packing winches!
OIL & LUBRICANTS













   886   887   888   889   890