Page 729 - LMS_Catalog_65
P. 729

 ENGINE ACCESSORIES
717
 Chrysler V8 - 273, 318, 340, and 360 C.I.D.
All Models. 1966 and Up Log Style Direct Replacement
mfr
BAR
CM-20-2600402P CM-50-602593
CM-20-9224
Barr Marine Products
       CM-20-6672J-P
CM-20-2847405P
CM-1-6672D CM-1-6672J CM-1-6672P
CM-20-1947617
CM-20-9232P
       Part No.
CM-1-6672D
CM-1-6672J CM-1-6672P
CM-20-1947617 CM-20-2600402P CM-20-2847405P CM-20-4142411P CM-20-6672J-P CM-20-6674J-P CM-20-6674P CM-20-9232P CM-20-9224 CM-20-9225 CM-20-9226 CM-50-115729 CM-50-602593
Description
CM-20-4142411P
CM-20-6674J-P CM-20-6674P
End flange gasket for raw water cooled manifolds, (2) required per manifold.
Replaces Chrysler part 2847480. Will fit both manifold styles.
End flange gasket for fresh water cooled manifolds, (1) required per exhaust end. Will fit both manifold styles. Manifold to cylinder head gasket set,
(1) required per engine. Replaces Chrysler part 3745220. Will fit both manifold styles.
Exhaust elbow extension retainer.
Mounting kit for lower elbow riser (includes bolts, gasket and pipe plugs).
Mounting kit for exhaust elbow (includes bolts, gasket and pipe plugs).
Mounting kit for upper riser/elbow (includes sleeve, O-rings retainers, bolts and pipe plugs).
Mounting kit for exhaust elbow connector for fresh water cooled manifold (includes bolts, gasket, and pipe plugs). Mounting kit for exhaust riser for fresh water cooled manifold (includes bolts, gasket and pipe plug).
Mounting kit for raw water cooled manifold (includes bolts, gasket and pipe plugs).
Mounting kit for 6” extension (includes sleeve, O-rings retainers and bolts).
Exhaust to elbow extension retainer sleeve.
Exhaust to elbow extension inner seal. Not Pictured
Exhaust to elbow extension outer seal. Not Pictured
Stainless steel exhaust manifold stud nut. Not Pictured
Stainless steel exhaust manifold stud.
Chrysler V8 - 273, 318, 340, and 360 C.I.D.
All Models. 1986 and Up Center Riser Direct Replacement
534005
50-512-019
                     CM-1-4417063
50-525-018
50-525-019
534002
Made in the U.S.A. Quality Since 1933
      Part No.
CM-1-4417063 534005 534002
534004 50-512-018 50-512-019 50-525-018 50-525-019 CM47-4417127 CM47-4417232
Water cooled center discharge exhaust manifold to fit the small block Chrysler
(1/2” N.P.T. cooling hose connections). Used during years 1986 and later.
Generic riser designed to be mounted to the original Chrysler center riser exhaust manifold
(for use with 3” I.D. exhaust hose/3/4” N.P.T. cooling hose connection).
Adaptor kit (sold as shown) to fit the original Chrysler center riser exhaust manifold to the Barr style riser (part 534005). Adaptor must be used for Barr style riser.
Riser gasket for raw water cooled manifolds (installed between manifold and adaptor plate).
1/2” N.P.T. x 3/4” hose (straight barb) brass fitting.
3/4” N.P.T. x 3/4” hose (straight barb) brass fitting.
1/2” N.P.T. x 3/4” hose (90°) brass fitting
3/4” N.P.T. x 3/4” hose (90°) brass fitting.
Riser gasket for raw water cooled manifolds (installed between adaptor plate and riser).
Riser gasket for fresh water cooled manifolds (installed between manifold and adaptor plate).
50-512-018
Description
CM47-4417232
534004 CM47-4417127
         Note: Manifold includes all mounting hardware, gaskets and plugs.
 MANIFOLDS
































   727   728   729   730   731