Page 56 - LMS_Catalog_65
P. 56

 44
ELECTRICAL
mfr
BEP
Panel-Mounted Battery Switches
Voltage Sensitive Relay (VSR)
For 12V and 12/24V Systems
      701-PM
mfr
BEP
When the engine is started and the start battery reaches 13.7 Volts, the VSR engages, allowing two battery banks (start and house) to be charged simultaneously. This system eliminates the possibility of draining the start battery and protects sensitive electronic equip- ment powered from the house battery. 710-125A-DS (Dual Sense) allows the unit to sense the voltage for both batteries. If either bat- tery is receiving a charge, it will activate paralleling the two battery banks. It is designed for situations where a battery charger or sec- ond charging source is used into the house battery.
 Designed specifically for panel-mount applications. Compact and lightweight with a removable knob on 701-PM. Has countersunk recesses for surface-mount applications and requires a standard 2-1/16" hole cut-out. Also has captive inserts for 3/16" nuts; full access for cables — no restrictions and a standard interchange label system. Dimensions: 2-3/4"L x 2-3/4"W x 3"H.
Part No.
710-140A
mfr
BSS
Each Stud Size Volt Dimensions
$143.42 1/4" 12/24 2-3/4"L x 2-3/4"W x 2"D
Add-A-Battery
701S-PM
  Part No.
701-PM 701S-PM
Positions Each On–Off
Stud Amps
Size Cont./Moment.
$34.99 On–Off 3/8" $49.99 1–2–Both–Off 5/16"
Compact Battery Switches
Ignition Protected
275/455 200/300
      e-Series Dual Circuit PlusTM Battery Switch (No. 5511) simplifies battery switching, isolates engine and house circuits and the switch combines battery banks for emergency starting. 120 Amp SI-Series Automatic Charging Relay (ACR) (No. 7610) automatically combines battery banks during charging and isolates battery banks when discharging and when starting engines.
 7
mfr
BEP
$187.99 12 DC
Mini Add-A-Battery
350/600
00
 701S
701
Part No.
7650
mfr
BSS
Amps
Each Volts Cont./Intermittant
   700 Easyfit has a removable threaded ring allowing for panel thicknesses up to 3/4". Same as the 701 with a remov- able back cover. Can also be surface mounted. 2-3/4" square x 4-3/8" tall. Are rated for use on electrical systems up to 48 Volts DC. 701 Mini Switch has a removable knob in the “OFF" position to prevent unauthorized use of boat. 701S Mini Switch is for tight mounting situations on smaller boats. It will handle the cranking loads of any outboard engine on the market. They are heavy-duty, waterproof, have extra large cable access. Can be flush or surface mounted. Dimensions: 2-3/4"L x 2-3/4"W x 3"D for 701 & 701S.
The mini Add-A-Battery offers a compact, simple way to control the switching with the m-Series Dual Circuit PlusTM Battery Switch (No. 6011) and automatically share a single source of charging between two batteries with the mini ACR Automatic Charging Relay (No. 7601). m-Series Dual Circuit PlusTM Battery Switch simultaneously switches two isolated battery banks with the option to combine them when start battery is low. Mini ACR manages the charging cur- rent from alternators up to 65 Amps found on many outboards and inboard engines.
 Part No.
700 701 701-S
Each
$42.99 $39.99 $46.99
Positions On–Off On–Off On–Off 1–2–Both–Off
Stud Amps
Size Cont./Moment. 3/8" 275/455 3/8" 275/455
5/16" 200/300
Part No. Each
7649 $137.99
Volts
12 DC
Amps Cont./Intermittant 300/450
   BATTERY SWITCHES






































   54   55   56   57   58