Page 533 - LMS_Catalog_65
P. 533

 CONTROLS
521
Morse Cable Fittings
 SERIES 30 10-32 Thread
SERIES 40 1/4"-28 Thread
31799-001 - Quick-Release type, stud is 7/16" long with #10-32 UNF threads. 7/8" from center of stud to end of barrel. Complete with nut and lockwasher. 31126 - Quick-Release type, stud is 9/16" long with 1/4"-28 UNF threads. 15/16" from center of stud to end of barrel. Complete with nut and lockwasher. 35242 - Quick-Release type, stud is 7/8" long with 5/16"-24 UNF threads. 1-1/8" long from center of stud to end of barrel. Complete with nut and lockwasher.
29104 - Quick-Release type, stud is 9/16" long with 1/4"-28 UNF threads. 15/16" from center of stud to end of barrel. Complete with nut and lockwasher. 32267 - Quick-Release type, stud is 7/8" long with 5/16"-24 UNF thread. 1-3/16" from center of stud to end of barrel. Complete with nut and lockwasher.
31800 - Fits 3/16" thick lever with 3/16" dia. hole. Length from center of pin to barrel ends is 1-9/16". 31125 - Fits 9/32" thick lever with 1/4" dia. hole. Length from center of pin to barrel end is 2".
33395 - Fits 11/32" thick lever with 5/16" dia. hole. Length from center of pin to barrel end is 2-1/4".
29025 - Fits 9/32" thick lever with 1/4" dia. hole. Length from center of pin to barrel end is 2".
42212 - Fits a 11/32" thick lever with 5/16" dia. hole. Length from center of pin to barrel end is 2-1/4".
45583 - Fits 1/8" thick lever with a 3/16" dia. hole. 31029 - Fits 1/8" thick lever with 1/4" dia. hole. 31539 - Fits 3/16" thick lever with a 1/4" dia hole. 44770 - Fits 3/16" thick lever with 7/16" dia. hole. 32392 - Fits 9/32" thick lever with 1/4" dia. hole. 39890 - Fits 5/16" thick lever with 1/4" dia. hole. 37691 - Fits 13/32" thick lever with 5/16" dia. hole.
39110 - Fits 1/8" thick lever with 1/4" dia. hole. 45199 - Fits 1/8" thick lever with 5/16" dia. hole. 43314 - Fits 9/64" thick lever with a 1/4" dia hole. 31537 - -Fits 3/16" thick lever with 1/4" dia. hole. 36361 - Fits 1/4" thick lever with 1/4" dia. hole. 39804 - Fits 9/32" thick lever with 1/4" dia. hole. 42419 - Fits 3/8" thick lever with 3/8" dia. hole.
300646 - Terminal Eye, fits 5/16" dia. pin. Length from center of hole to barrel end is 1".
300561 - Terminal Eye, fits 3/16" dia. pin. Length from center of hole to barrel end is 1".
Fig. 9439 No. 67-19 - E-Clip used on MN and MT-3.
41134 - Terminal Eye, fits 5/16" dia. pin. Length from center of hole to barrel end is 1-3/8" (Fits inside 5/16" yoke)
37639 - Terminal Eye, fits 5/16" dia. pin. Length from center of hole to barrel end is 1" (aluminum)
300965 - Pivot Pin, for terminal eye No. 300646 - Stud is 1/4"-28 UNF x 5/8" long (for 1 or 2 eyes). 301456 - Terminal Eye Pin Kit-contains terminal eye pin E-ring, nut, and washer.
31509 - Cable Clamp 7/32" dia. holes on 1" centers. 32010 - Cable Clamp 7/32" dia. holes on 7/8" centers. 31538 - Shim, for use with clamp 31509. 7/32" dia. holes on 1" centers.
35777 - Shim, for use with clamp 32010, 7/32" dia. holes on 7/8" centers.
35531 - Dual Cable Hook Clip, for two cables. Six 3/16" dia. holes on 3/4" centers, 3/8" apart.
36174 - Cable Hook Clip, six 3/16" diameter holes on 1/2" centers, 3/8" apart.
37664 - 30L Series Conduit Clamp — See Fig. 2114
31532 - Cable Clamp, two 7/32" dia. holes on 1" centers.
21227 - Cable Clamp, four 7/32" dia. holes on 1" centers.
44386 - Cable Brake
44386 - Cable Brake
    Ball Joints
Clevis Pivots
Terminal Eye
Terminal Eye Pin
Clamps & Fasteners
Cable Break
Note: Bold Underlined Numbers are Stocked
SERIES 60
5/16"-24 Thread
38491 - Solid type, stud is 11/16" long with 5/16"-24 UNF thread. 1-1/8" from center of stud to end of barrel. Complete with nut and lockwasher.
29108 - Quick-Release type, stud is 7/8" long with 5/16"-24 UNF thread. 1-1/8" from center of stud to end of barrel. Complete with nut and lockwasher.
29132-001 - Fits 11/32" thick lever with 5/16" dia. hole. Length from center of pin to barrel end is 2-1/4".
38820 - Fits 1/2" thick lever with 7/16" dia. hole. Length from center of pin to barrel end is 2-7/8".
43195 - Fits 7/16" thick lever with a 3/8" dia. hole. 40889 - Fits 1/2" thick lever with 1/2" dia. hole. 44643 - Fits 5/32" thick lever with 5/16" dia. hole.
45428 - Terminal Eye, fits 5/16" dia. pin. Length from center of hole to barrel end is 1-5/8". Fits 5/16" yoke.
36733 - Cable Clamp, two 9/32" dia. holes on 1-1/4" centers.
37884 - Shim, for use with clamp 36733 two 9/32" dia. holes on 1-1/4" centers.
              Part No.
Each Part No. Each
Part No.
Each Part No.
37885 - Clamp 36733 and Shim 37884.
44386 - Cable Brake
Each Part No.
045583 300646 300561 300965 301456
042212 042419 044386
Each
$11.65 $5.26 $13.16 $12.42 $14.98
$21.79 $20.75 $24.77
     031029 $11.32
031539 $13.72
SERIES 30 - 10-32 THREA
033395 $19.14
D
037664 $7.82
     031125 $16.74
  031126 $14.77
    031538 $1.43
      029108 $43.04
031799001 $15.42
032392 $13.23
029104 $23.84
031537 $15.13
037884 $5.62
S
035242 $53.46
036174 $13.29 SERIES 40 - 1/4"-28 THREA
031538 $1.43
037691 $11.90
   031800 $16.78
035531 $34.40
039471 $16.02
   031509 $1.65
032010 $5.01
035777 $5.71
039890 $21.07
   021227 $14.51
037639 $12.38
   021600 $29.90
029025 $19.46
031532 $2.67
032267 $25.87
036361 $14.92 ERIES 60 - 5/16"-24 THRE
038491 $13.82
044386 $24.77 D
039110 $12.61
   041134 $20.20 AD
    029132001
$19.91 037885 $9.40
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
044386 $24.77
  CABLES FITTINGS
   531   532   533   534   535