Page 498 - LMS_Catalog_65

486
STEERING
HC5370-3 Side-Mount O/B Cylinder
13" 9"
mfr
TEL FIG 6564
Side-mount cylinders require a minimum clearance of 13" from end of tilt tube towards motor well wall or gunwale and a minimum
clearance of 14" for installing. Minimum engine centers for two engines is 26".
Part No.
HC5370-3 HS5153 HS5173
Each
Description
$571.28 Side-Mount O/B Cylinder
$56.95 Seal Kit for HC5370-3 (just Seals)
$178.67 Seal Kit for HC5370-3 (Screw-in End Replacement)
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
POWER STEERING CYLINDER SPECIFICATIONS
CYLINDER MODEL
PART NUMBER
BORE DIAMETER Inches (mm)
NOMINAL SHAFT DIAMETER Inches (mm)
STROKE
Inches (mm)
VOLUME CUBIC IN. (cc)
OUTPUT FORCE Ft.Lbs (N)
TORQUE (SEE NOTE) In-Lb. (Nm)
Single 9" Stroke x 1
HC5801-2
2.00 (51)
1.00 (25.4)
9 (229)
21.25 (348)
2946 (13090)
18900 (2130)
Single 11" Stroke x 1
HC5803-2
2.00 (51)
1.00 (25.4)
11 (280)
25.9 (425)
2946 (13090)
23140 (2610)
Single 9" Stroke x 1
HC5805-2
2.50 (64)
1.00 (25.4)
9 (229)
37.11 (608)
5154 (22926)
33065 (3736)
Twin 9" Stroke x 2
HC5802
2.00 (51)
1.00 (25.4)
9 (229)
42.50 (697)
5892 (26190)
37800 (4260)
Twin 11" Stroke x 2
HC5804
2.00 (51)
1.00 (25.4)
11 (280)
51.80 (850)
5892 (26190)
46280 (5220)
Twin 9" Stroke x 2
HC5806
2.50 (64)
1.00 (25.4)
9 (229)
74.33 (1216)
10308 (45852)
66130 (7472)
Note: Theoretical torque about pivot point at 35 degrees articulation with 1,000 PSI (70 BAR) system pressure.
SeaStar Stern Drive Cylinder
SeaStar Front Mount Outboard Steering Cylinders
SeaStar Stern Drive Cylinders
mfr
TEL
mfr
TEL
Part No.
HC5347 HC5348-3
mfr
TEL
Simple autopilot interface. Easy installation. Quick steering response. Six turns lock-to-lock. Balanced cylinder compatible with autopilots.
Each Description
$800.66 Front Mount Cylinder - Used with Honda 115-130 HP Only
$844.15 Front Mount Cylinder - Used with
some Johnson/Evinrude/Suzuki/Yamaha
Capilano Inboard Cylinders
Part No.
HC5331-3 HC5326-3
mfr
TEL
Each Description
$672.47 SeaStar Cylinder, 125 8-EM I/O 92 VPS $672.47 SeaStar Cylinder, BA 150-7EM, Sterndrive Type
SeaStar Stern Drive Cylinders
For Boats Up To 50'
Stern drive cylinders feature rugged design and rigid quality control, features found in all SeaStar® products.
Cylinders are made from brass & stainless steel and feature stain- less steel and bronze mounting hardware. Suitable for single or dual station use.
• Heavy duty brass cylinder • Easy installation for single and dual rudder vessels • Cylinders supplied with bleeder fittings
• Two axis articulation • Easy autopilot interface
Part No. Each Description
HC5357 $1,208.97 BA200-7TMC Clevis
Part No.
HC5332
mfr
TEL
Part No.
HC5343
Each Description
$676.82 SeaStar Stern Drive Cylinders, Merc/Volvo Stern Drive
Catamaran Twin O/B
Each Description
$779.26 Catamaran O/B (Fixed Mount)
SEASTAR CYLINDERS