Page 48 - LMS_Catalog_65
P. 48

 36
ELECTRICAL
 COLE-HERSEE PUSH-PULL SWITCHES
All brass construction, for 6-36 volts DC; non-corrosive interiors; moisture-repellent insulators. All switches on this page accommodate 1" thick panels except for Fig. 3010, No. M606, which mounts through 5/8" thick panels. All have screw-on knobs with 10-32 thread. Rated: 10 AMPS at 12V DC.
 2-Position Push-Pull Switch
1 Circuit
      mfr
M482
8113-10
C/H FIG 3008
TWO POSITIONS: OFF–ON (S.P.S.T.). This switch is normally “OFF". Gasket-sealed, flanged case. For ignition lights and compart- ment lights. 7/8" Diam. hand-polished chrome plated brass knob. Terminal screws and lock-washers. Mounting stem is 3/8" Diameter and 1-1/4" long.
Part No. Each
M606-BX $26.60
Standard Package – 10
Terminals
2-12" Wire Leads
Part No.
M482-BX 8113-10-BX
mfr
Each
$23.50 $4.40
Standard Package – 10
Terminals
2 Screw Spare Knob
2-Position Push-Pull Switch
Normally ON — 1 Circuit
Typical wiring diagram for using two M-630 switches to control the same accessory circuit from either of two locations.
mfr
C/H FIG 3007
TWO POSITIONS: ON 1–ON 2 (S.P.S.T.). Normally “ON." “ON"
in both positions for alternate energizing of any two circuits indi- vidually from one common feed. Mounting stem is 3/8" diam. and 1-1/4" long. 3/4" diameter chrome-plated brass knob. Mounts in panels through 1" thick. 6-36 Volts DC. Rated: 10 Amps at 12V DC. Part No. Each Terminals M630-BX $25.15 3 Screw Standard Package – 10
Heavy-Duty Push-Button Switch
Momentary
2-Position Push-Pull Switch
1 Circuit
COLE HERSEE
H.D. 2-Position Sealed Push-Pull Switch
1 Circuit
mfr
C/H FIG 3010
TWO POSITIONS: OFF–ON (S.P.S.T.). Normally “OFF". Two
18-gauge 12" long insulated copper wire leads. Mounting stem is 3/8" Diam. and 1-1/4" long. Has a chrome plated brass knob. Sealed in plastic to protect against moisture and dirt. Mounts through pan- els to 5/8" thick, ideal for on deck applications.
COLE HERSEE
         C/H FIG 3009
TWO POSITIONS: OFF–ON (S.P.S.T.). 3/4" Diam. bright chromeplat-
ed brass knob. Mounting stem is 3/8" Diam. and 1-1/4" long.
Part No
M628-BX
C/H FIG3011
Each Terminals
$21.45 2 Screw Standard Package – 10
3-Position Push-Pull Switch
2 Circuits
COLE HERSEE
COLE HERSEE
     mfr
COLE HERSEE
 THREE POSITIONS: OFF–ON 1–ON 1 & 2. Normally “OFF" single pole. This switch is especially suited for lighting circuits such as cabin and running lights. Energizes one circuit in first “ON" position. Energizes two circuits in second “ON" position. Mounting stem is 3/8" Diam. and 1-1/4" long. Chrome plated brass knobs.
mfr
Part No. Each
M476-BX $42.85
Standard Package – 10
Push-Button Switch
Momentary
Terminals
3 Screw
Flanged moisture-proof, gasket-sealed case. Mounting stem is 5/8" diam. and 1" long. Rated: 10 Amps at 12V DC.
Part No. Each Description M485-BX $21.20 Screw Terminals
C/H FIG 3019
COLE HERSEE
For Screw-on Rubber Boot use Part No. 83280 Standard Package – 10
3-Position Push-Pull Switch
2 Circuits
   mfr
SIE
 mfr
COLE HERSEE
THREE POSITIONS: OFF–ON 1–ON 1 & 2. First “ON" position ener- gizes one circuit. Second “ON" position energizes both circuits. Mounting stem is 1-1/4" long by 3/8"-24 thread. Chrome-plated brass knob. Rated: 20 Amps at 6V DC, 15 Amps @ 12V DC.
Part No. Each Terminals
MP39580 $24.53 3 Screw Standard Package – 10
C/H FIG 3992
 Folded rectangular case. Mounting stem is 5/8" Diam. and 1-3/8" long. Rated: 10 Amps at 12V DC. For 6-36V DC applications.
Part No. Each Description M492-BX $26.95 Screw Terminals
 Standard Package – 10
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
  PUSH/PULL SWITCHES













   46   47   48   49   50