Page 47 - LMS_Catalog_65
P. 47

 ELECTRICAL
35
 COLE HERSEE MASTER DISCONNECT SWITCHES
Use with alternator or generator systems to prevent electrical fires, tampering, theft & battery drain.
   SPST (SINGLE POLE, SINGLE THROW) Switches disconnect battery circuit only and do not disconnect alternator or generator field circuit. When used with an alternator, engine(s) should be stopped before switching to OFF position to prevent possible alternator diode damage.
Disconnect Switch Two Positions, OFF-ON
Disconnect Battery Circuit Only
COLE HERSEE
C/H FIG 3058
DPST (DOUBLE POLE, SINGLE THROW)
Switches disconnect battery circuit and alternator or generator field circuit. Electrical contacts are arranged to interrupt field circuit before battery circuit is broken.
Disconnect Switch Two Positions, OFF-ON
Disconnect Battery & Field Circuit
  No. 82065 Blue Enamel Aluminum Face Plate for all Disconnect Switches.
    mfr
Has a brass case with brass contacts, a die cast lever and 3/8" diam- eter terminals. Brass mounting stem is 3/4" diameter by 1-13/32" long. Fits panels thru 15/16" thick.
C/H FIG 3059
707B Power Switch
Has a brass case and bushings with silver contacts and a die cast lever. Two 3/8" dia. screw terminals. Brass mounting stem is 3/4" dia.
Part No.
M284-BX 82065-BX
Each Volts Terminals–Type
$69.30 6-12 DC 4 – SPST $3.50 Face Plate for All
Master Disconnect Switches
by 1-13/32" long. Fits panels thru 15/16" thick.
mfr
M284 Electrical Ratings
6 to 12 Volts DC 175 Amps continuous 1000 Amps intermittent 15 seconds ON,
5 minutes OFF
 Conform to USCG Safety Standard Section 183.410 for ignition protection
 Electrical Ratings
6 to 36 Volts DC 175 Amps continuous 800 Amps intermittent 15 seconds ON,
5 minutes OFF Ignition Protected
  Part No.
M284-01-BX
Each Volts
$81.80 6-36 DC
Push–Button Switch
Normally ON
Terminals–Type
 mfr
mfr
C/H
COLE HERSEE
C/H FIG 3013
COLE HERSEE
M-289 & M-290 D.P.S.T. (Double Pole Single Throw) 2 position: Discon- nects battery circuit & alternator or generator field circuit. Electrical contacts are arranged to interrupts field circuit before battery circuit is broken. Brass case with chrome plated lever. Mounting stem is 3/4'' dia. x 1-13/32'' long. Fits panels to 15/16'' thick.
Normally ON–(S.P.S.T) ON–MOMENTARY OFF. OFF with button depressed, spring return to ON. Gasket sealed case protects against moisture and dust. Mounting stem is 5/8"-32, 1" long. Fits panels up through 3/4" thick. Rated: Continuous 20 Amps @ 12V DC, make and brake 10 Amps @ 12V DC.
Part No.
M-289 M-290 82065-BX
Each Volts Type
$98.16 6-36 VDC DPST $102.61 6-36 VDC (Silver Contacts) DPST
$3.50 Face Plate
Part No.
M639-BX
HEL FIG 2088
Each
$22.50
Standard Package – 10
Battery Master Switch
On-Off
Terminals
2 Screw
2 – SPST
Standard Package – 4
  Master Disconnect Switches
 M-289
82065
      Extra-Heavy-Duty Push-Button Switch
Momentary
     mfr
Seawater-proof. For interrupting circuit. Prevents theft and short-circuit. Removable red key. 12V continuous rating is 100 Amps. 12V intermittent rating is 500 Amps — 15 seconds on, 5 min- utes off and is Ignition protected.
C/H FIG 3018
Part No.
002843011 706729011
Each
$29.85 $11.35
Description
Battery Master Switch Spare Switch Key
Recessed face nut prevents button from being accidentally kicked in. Silver inlaid contacts. Mounting stem is 5/8" diam. and 1-3/8" long. Rated: 35 Amps at 12V DC.
Part No. Each
M612-BX $32.55 Standard Package – 10
mfr
COLE HERSEE
  PUSH/PULL SWITCHES














   45   46   47   48   49