Page 401 - LMS_Catalog_65
P. 401

 PAINT
389
 mfr
mfr
MMM FIG 8676
3M HookitTM 6" Finishing Film Discs
3M ScotchBrite Surface Conditioning Discs
 Roloc Attachment
  MMM FIG 9448
These discs incorporate a hook and loop system for easy attachment. Fast cutting, long-lasting. These discs are pre-punched with the standard six-inch hole pattern for dust-free sanding. Used with low-profile, dust-free Back-Up Pads. Excellent for sanding on epoxy primers and tough urethane paints. Can be used for dry or wet sanding.
ENTIRE PAGE SOLD IN STANDARD PACKAGES ONLY
Roloc Disc and Pad
Per Pkg. Size Type RPM Pkg. Case
 The web construction creates a
uniform finish. It resists loading
and heat build-up. Use on die
grinders and high-speed air/
electric drills. The coarse grade
equates with 80 to 100 and medium grade 100 to 120 grit. No hole. 5540 is hard rubber back-up pads for use with Roloc discs. 2" thru 4" pad assemblies INCLUDE a 1/4" diameter steel shaft. 7" pad assembly has 5/8"-11 female attachment.
 Part No.
01075 01077 01079 01083 00615 00616
Per Box
$88.43 $88.43 $88.78 $79.73 $67.83 $75.28
Grit Dust-Free
P320 Yes P240 Yes P180 Yes
P80 Yes 40E Yes 36 Yes
Size
6" 6" 6" 6" 6" 6"
Per Box
100
100
100 07480
75 07481 25 07485 25 07486
DISC AND PADS SOLD SEPARATELY
DISCS – ROLOC ATTACHMENTS
  Part No.
 $37.20 $37.20 $70.33 $70.33
2" Coarse — 25 2" Medium — 25 3" Coarse — 25 3" Medium 13000 25
4 4 4
10
5 10 10
Rolls Per Case 5
5
5
5
5
        3M Heavy-Duty 5" Green CorpsTM Grinding Discs
DISC HOLDERS
   mfr
MMM FIG8616
These heavy-duty, all-purpose grinding
disc are used on all types of metal grinding and removing paint. They are high-per- formance, long lasting and fast cutting. Maximum operating speed – 5500 RPM.
07492 07494 05540
mfr
$9.15 4"
$6.36 2" $33.76 3"
HookIt Disc Holder HookIt Disc Holder Roloc Disc Pad Assy.
1 1 1
 3M Mechanic’s Abrasive Roll
 Part No.
01913 01914 01915
MMM FIG 3635
Features 3MTM Precision-Shaped Grain, triangu-
lar-shaped grains that cut at least 30% faster and last
at least 30% longer than other conventional ceramic
abrasives. Extremely sharp precision-shaped grain
provides longer life than conventional ceramic abra-
sives. Sharper cutting surface means less pressure is required. Clean Sanding multi-hole pattern delivers excellent dust extraction
mfr
Per Box Grit
$105.92 50 $109.23 36 $111.59 24
Diam. x Hole
5" x 7/8" 5" x 7/8" 5" x 7/8"
Per Roll $44.57 $48.60 $48.60 $48.60 $48.60
Std. Size Pkg.
1" x 20 yds. 1 1" x 20 yds. 1 1" x 20 yds. 1 1" x 20 yds. 1 1" x 20 yds. 1
SOLD IN FULL BOXES ONLY
Grit
P320J P220J P180J P120J P100J
Discs Per Box 20 20 20
Boxes Per Case 5
5
5
MMM FIG 8689 Emery Cloth
Designed for general purpose deburring, sand- ing and clean-up work. Can be used for metal sanding as well as on a wide variety of other surfaces. A new bond construction enables the strip to stay sharp and cut longer. Not affected by oils, mineral spirits or water.
  Part No.
05002 05005 05006 05008 05009
mfr
MMM FIG 9647
7517 is an 8" diameter large area stripe removal (LASR) disc assembly consisting of 16 extremely flexible individual discs stacked together. It quickly removes vinyl stripes and graphics and their adhesive without damaging gelcoat or marine paint. This assembly is designed to be used with a variable speed buffer with a 1500-3000 RPM speed range. Do NOT use on clear coat paints or plastics.
Part No. Each Description
07517 $101.79 LASR Disc Assembly
  3MTM CubitronTM II HookitTM Clean Sanding Abrasive Discs 737U
     3M Large Area
Stripe Removal Disc Assembly
 Part No. Each Type Size Grit
31370 $66.35 Cubitron II 6" 40
 31371 $65.82 Cubitron II 6" 80
 31372 $55.01 Cubitron II 6" 120
 31373 $55.01 Cubitron II 6" 150
 31374 $55.01 Cubitron II 6" 180
 31481 $55.01 Cubitron II 6" 220
 31482 $55.33 Cubitron II 6" 240
 31483 $55.33 Cubitron II 6" 320
 34462 $69.09 Cubitron II 4.5" 80
 34464 $53.65 Cubitron II 4.5" 120
 34466 $53.65 Cubitron II 4.5" 180
 34468 $55.00 Cubitron II 4.5" 240
 34469 $55.00 Cubitron II 4.5" 320
  Diam. x Hole
8" x 5/8"
 3M EXL RolocTM Unitized Wheels
For Stainless Weld Shaping and Polishing
The EXL Roloc Unitized Wheels are designed to grind, feather and polish stain- less steel and aluminum welds for railings and towers. Design allows easier access to 90° tubular welds. Suggest using 90° (right angle die grinders) maxi- mum 18,100 RPM. For getting into hard to work areas.
 mfr
MMM FIG 9634 Front View
Back View
Part No.
17184 17191 17195
Each
$7.89
$9.26 $11.22
Size Grit Type
3" Diam. x 1/4" WxNH 2S Fine 3" Diam. x 1/4" WxNH 6A Medium
3" Diam. x 1/4"WxNH 8A Coarse
Box Case
10 40 10 40 10 40
   SANDPAPER
DUST FREE
   399   400   401   402   403