Page 399 - LMS_Catalog_65
P. 399

 PAINT
387
3M StikitTM 6" Gold Film Discs
For DA Sanding of Tough Epoxy Primers
   mfr
MMMFIG 9417
Stikit Gold Sheet Rolls are coated with aluminum oxide and bonded with resin. The Stikit adhesive back gives quick adhesion to pads and blocks.
3M StikitTM 6" & 8" Gold Discs
For DA Sanding of Tough Epoxy Primers
Rolls Per Case 4
4
4
4
4
4
4
4
4
mfr
051131-02591
MMM FIG 8618
Film backing and new mineral increases cut rate. Designed for sanding epoxy and catalyzed paints. Discs are specially treat- ed for minimum loading and have pres- sure sensitive adhesive backing for easy- on easy-off application to Stikit Disc Pad 5576. No hole. Can be used wet or dry.
 Part No. Each Grit Size Per Case
02591 $61.20 320A 2-3/4" x 45 yds. 10
 02594 $61.20 220A 2-3/4" x 45 yds. 10
 02595 $61.20 180A 2-3/4" x 45 yds. 10
 02599 $61.20 80A 2-3/4" x 25 yds. 10
     mfr
Part No.
01323 01328 01331 01332 01333
mfr
6" STIKIT DISCS
Per Roll Grit
$88.78 P400 $79.73 P220 $84.51 P120 $84.51 P100 $84.51 P80
Discs Per Roll
75 Roll 75 Roll 75 Roll 75 Roll 75 Roll
Rolls Per Case
6 6 6 6 6
MMM FIG 8617
The same great features of the original 236U with improved performance. Premium aluminum oxide on a C-weight paper backing. The new paper backing provides flexibility and improved edge durability. It is resin bonded for increased cut and disc life. Also has a load-resistant coating.
3M StikitTM 6" and 8" Imperial Resin Bond Discs
For DA Sanding
     Part No.
55568 55567 55566 55565 55564 55563 55562 55561 55560
Discs Grit Per Roll
400A 100 P320 100 P240 100 P220 100 P180 100 P150 100 P120 100 P100 100 P80 100
mineral discs are exceptionally dura- ble and tough. Fast and sharp cutting, full resin over resin. F-weight paper is for use on bare metal, fiberglass plas- tic and wood. Used for rough sanding and shaping and scratch refinement after coarse grade sanding. No hole.
6" STIKIT DISCS
MMM FIG 8619
These gold-colored aluminum oxide
Per Roll
$59.46 $59.46 $59.46 $59.46 $59.46 $59.46 $59.46 $59.46 $64.41
MMM FIG 8623
5546 Stikit low-profile finishing disc pads has a soft foam construction for fine finish sand- ing and conforms to contours and curves. Size: 6" diameter and 5/16"-24 threaded shank. For orbital sanders. 5568 has a soft foam construction and tapered edge provid-
SOLD IN FULL ROLLS ONLY
           3M StikitTM Disc Pads
Part No.
21793 21794
21784 21785 21786 21787 21788
6" STIKIT DISCS
Per Roll Grit
$98.34 80F $109.29 60F
8" STIKIT DISCS
$82.47 P150F $82.39 P120F $82.39 P100F $88.91 80F
$100.05 60F
Discs Per Roll 100 100
50 50 50 50 50
Rolls Per Case 4
4
4 4 4 4 4
  mfr
     ing uniform finish on contours and curves. 5/8"-11 female thread. 5576 are firm Stikit disc pads for DA sanders. Use with Stikit discs. Pad face gives good disc adhesion and easy disc removal. Lightweight, shock-resistant, well balanced and has a durable plastic 5/16"-24 male thread stud and a conformable foam body.
3M StikitTM 6" & 8" Green Corps Production mfr Pre-Cut, Resin Bond Discs
MMM FIG 8685
1549, 1552 and 1556 are
made with a tough mineral
bond construction along with
a special treatment to resist
loading. They may be used
for heavy sanding on gummy/
waxy surfaces. 1548, 1550
and 1551 are the same min-
eral bond construction with
a special resin bond on heavy “E" weight paper. Excellent for coarse sanding of hull and deck areas with tough coatings such as epoxy and urethanes. Boxed discs are individually lined for adhesive pro- tection. All are pressure sensitive adhesive backed with no hole.
 Part No.
05546 05568 05576
mfr
Max
Each RPM Size Type
$28.78 7,000 6" Soft $81.47 3,000 8" Soft $43.49 7,000 6" Firm
Std. Pkg. Pkg Per Case
1 10 1 10 1 10
3M StikitTM Gold Sheet Rolls
2-3/4" Width
     3MTM StikitTM Hand File Board
 MMM FIG 3649
Long, thin shape is excellent for hard, flat sanding applications. Durable body material is hard and solvent-resistant for long file board life. Embossed rubber face is resilient for good control and consistent contact. Very versatile – features two handles for easy one- or two-handed sanding
Part No. Each Description
05444 $60.55 2-3/4 x 16 File Board
Part No.
01548
01549 01556 01550 01551 01552
Per Roll/Box $219.90
Grit Discs
36E 100 Box
Roll/Box Per Case 5
5 5 5 5 5
6" STIKIT DISCS
 8" STIKIT DISCS
$144.07 80D $136.82 60E $180.06 40E $200.40 36E
$78.12 24E
50 Box 50 Box 50 Box 50 Box 20 Box
     SANDPAPER
   397   398   399   400   401