Page 379 - LMSCatalog21
P. 379

 GENERAL MAINTENANCE
367
 White Gel-Coat with Wax – Interior No Wax – Exterior
Chopped Fibers
WOC FIG9990
These chopped fiberglass fibers give added strength
    F/E FIG 1385
1450
1490 1500
and non-sag properties to resins.
Part No. Each Type Fibers
605961750 $17.90 Chopped Epoxy Glue
WOC FIG 8586
Size
16 oz.
Std. Pkg.
4
mfr
    mfr
  A white pigmented polyester gel-coat to repair the original, high- gloss gel-coat finish. Use to conceal gouges, chips, and scrapes in fiberglass gel-coat. A non-run, non-sag formulation of rigid, flexible polyester resins. Use Resin Colorant to tint Gel-Coat. Adding Resin Colorant to White Gel-Coat will produce pastel colors. Easy to sand. MEK hardener INCLUDED.
mfr
Part No. Each Color
701450 $148.65 White 701480 $35.85 White 701490 $49.45 White 701500 $157.70 White
Wax Size
No Gallon Yes Pint Yes Quart Yes Gallon
Case
4 12 12 4
A uniquely compounded epoxy sys- tem of vaseline consistency pro- ducing an almost clear glue line. Designed as a 1 to 1 mix, this epoxy
adhesive will bond to most any surface such as cement, fiberglass, wood, aluminum, steel and styrofoam. The pot life is approximately 45 minutes. All kits sold together as complete shrink-wrapped kits. Part No. Kit Size – Description Case 605900700 $29.90 Pint – Kit Complete 6 Kits
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Polyester Marine
    WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
FIG 1387
Yard Resin
F/E FIG6629
General purpose marine yard polyester hand lay-up resin which cures tack free and won’t sag. It has high-impact resistance and bonds well to fiberglass, metals, concrete and wood. It resists high heat, chemicals, solvents and salt water. Use with or without fiberglass fabric. Full weights. Hardener INCLUDED.
    Urethane Foam Two-Part System
     mfr
F/E
Part No.
700197 700198
Each
$31.20 $76.15
Size Case
 Two-part Urethane Foam provides excellent flotation and insulation qualities in a wide variety of uses. One cubic foot of Urethane Foam supports 50-60 pounds of weight. Use under floor boards, seats, decks, and in pontoons for flotation, rigidity and insulation around motor covers, roofs, pipes and behind wall panels, non fire retar- dant. 1800 quart kit covers 2.5 cubic feet; 1810 gallon kit covers 10 cubic feet. Two pounds per cubic foot density.
Quart Gallon
12 4
Part No.
701800 701810
Kit
$100.10 $318.75
Size
2-Qt. Kit 2-Gal. Kit
Case
3 Kits 2 Kits
KAR FIG 1383
Aerosil Filler non-sag agent is designed to
prevent a liquid resin from running or sagging on a vertical surface. Mix into either polyester or epoxy resins.
Resin Thinner – Styrene
Mixed
Yields
2.5 cu. ft. 10 cu. ft.
Approx. Flotation 150 lbs. 600 lbs.
mfr
mfr
 WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Aerosil Filler Fibers
          Part No.
502714
Each Weight Size
$28.85 6 oz. Gallon
Microballoons
KAR FIG 6405
Description Case
Aerosil Filler 4
   KAR FIG1388
A thinner for all polyester resins and gelcoats. When used for spray- ing, reduce 5%. Not for use with epoxy products.
Part No. Each Size Case 502118 $17.40 Pint 12
Part No.
502710
mfr
 mfr
Microballoons are a brown, hollow phenolic sphere used as a light weight, easily sanded filler. A small addition, into resin, will make a paste or putty. May be easily mixed into either polyester or epoxy resin. Contains 2 oz. to make up a quart.
Each Weight Size Case
$17.30 2 oz. Quart 6
 RESIN & FIBERGLASS PRODUCTS















   377   378   379   380   381