Page 378 - LMS_Catalog_65
P. 378

 366
GENERAL MAINTENANCE
Empty Cartridge with Cap
Klear Kote Epoxy Resin Coating
    mfr
WES FIG4805
Fillable Caulking Tubes are designed for use with a standard caulk- ing gun. Great for injecting large amounts of WEST SYSTEM Epoxy, laying a lengthy bead of epoxy, making fillets, or injecting epoxy into holes as in hardware bonding, or repairing cracks in concrete. Tubes can be refilled again after cured epoxy is popped out. Holds approximately 10 fl oz.
mfr
WOC
Klear Kote Epoxy Coating is an clear, high gloss finishing epoxy, ideal as a table top epoxy, bar top epoxy, art epoxy, and for home improve- ments, craft projects, and many other finishes.
Part No. Each
810-24 $3.45
Description Case
Empty Caulking Cart. 24
Plastic Spreaders
KAR FIG 6560
These all stainless steel mixers are por- table, highly efficient industrial mixers designed to quickly and thoroughly mix all materials. Not a stirrer but a true mixer. LM is for pints, HS1 is for gallons. Spreaders are made of molded polyethylene with a tapered edge.
Part No.
KLEARKOTEQTKIT KLEARKOTE41KIT
Each
$29.93 $134.40
    mfr
adhesive for secondary bonding of laminated composites, steel, aluminum, cast iron, concrete, stone, and most wood. It bonds to itself in any combination. Spreads eas- ily, wets surface and will not run or sag. Available in fast, medium,
mfr
2-Part Polyurethane Flotation Foam
mfr
WOC
Liquid urethane foam. For use in hulls and cavities for floatation or insulation. Not affected by gas or oil. 2.0 lb per cubic foot density.
 Part No. Each
1016 $0.65 1017 $1.00 1018 $0.95 1019 $1.95
Size
2" x 2-1/4" 2-3/4" x 4" 3-1/2" x 5" 3-1/2" x 6"
Color Case
Blue 100 Yellow 100 Yellow 100 Yellow 100
Part No.
FOAMKITGL2LB FOAMKITQT2LB
Each Description
$97.93 Gallon $31.83 Quart
Pro-Set Adhesives
WE2 FIG 5512
This is a pre-thickened, two-part epoxy
      Bondo® Glazing & Spot Putty
  MMM FIG2500
Applied directly from its easy dispensing tube, Bondo® Glazing &
Spot Putty is formulated for quality auto body repairs in less time. Its 1-part nitrocellulose formula eliminates mixing and helps to keep small vehicle repairs simple, efficient and on schedule. It is non-staining, so it won't affect the color of paint or finishes around the repair area. It also shrinks very little over time, helping to ensure lasting repairs without rework.
and slow cure speeds.
Part No.
ADV-175/273-QC ADV-175/275-QC ADV-175/277-QC 300MW
Each
$45.10 $45.10 $45.10 $20.75
mfr
 Description
Fast Adhesive Tube Set Medium Adhesive Tube Set Slow Adhesive Tube Set
Spray Nozzle for 175 Adhesive Manual Dispensing Gun
Sika® Aktivator-100 is a moisture-sensitive, activating agent designed to improve adhesion. It is specifical- ly formulated for the treatment of bond faces prior to the application of various Sikaflex® and SikaTack® polyurethane adhesives. Sika® Aktivator-100 improves adhesion on substrates such as glass, ceramic coat- ed glass, the cut face of old polyurethane adhesive, polyurethane pre-applied windows, and paints. Sika Aktivator is required for the pre-treatment of glass to ensure adhesion of Sika adhesives.
Part No. Each
91283 $28.97
     Part No.
00651
Each
Description
300-X $153.65
Sika Aktivator-100
 $11.22 Red Glazing Putty 16
Vacuum Bag Sealant
mfr
WES
Vacuum Bag Sealant is a mastic tape seal- ant for airtight seals between vacuum bags and molds. Easy to work around difficult angles, patching small leaks in the vacuum system.
Part No. Each
883 $21.75
mfr
SIK
    RESIN & FIBERGLASS PRODUCTS


























   376   377   378   379   380