Page 377 - LMS_Catalog_65
P. 377

 GENERAL MAINTENANCE
365
Vacuum Bag Film
881 Breather Fabric
“Baby Blanket"
WES FIG 5540
881 Breather Fabric is an inexpensive, lightweight, polyester blan- ket that provides excellent air passage within the vacuum envelope while it absorbs excess epoxy. Used together with 879 Release Fabric (See Fig. 5539), these fabrics improve vacuum clamping results while decreasing the cost of vacuum laminate operations.
   WES FIG5530
Clear, heat-stabilized blown film produced from modified nylon resin. Can be used at temperatures up to 400°F (204°C) for typical composite cure cycle times. 60" wide.
Part No.
882-20
mfr
SIK
Part No.
Roll Size
$164.55 60" x 20 yds.
SOLD IN FULL ROLLS ONLY
Part No.
881-10
Roll Size Case
mfr
 mfr
$99.75 45" x 10 yards
1
   FMM52438 $119.59 FMM52458 $479.49
FMM54338 $150.99 FMM54348 $245.75
The 820 Epoxy Laminating Systems consist of one resin and a selection of three separate hardeners to suit your building or repair needs.
UV Stabilized Ad Tech 820 Laminating Resin only in Pail, Gallon, and Quart containers.
Marine 861 UltraFair is a convenient trowelable filler developed for fairing large surface imperfections on aluminum, steel, fiberglass or wooden marine vessels above or below the water line.
Marine 861 UltraFair is a convenient trowelable filler developed for fairing large surface imperfections on aluminum, steel, fiberglass or wooden marine vessels above or below the water line.
A236-25 STRC. ADH. F Bonding of metallic structures, plywood for application requiring high performances and flexibility in Transport industries (truck, bus) and Marine (hull bonding, deck bonding, interior design). A236-120 STRC. ADH.
P-11 TYP2 Dark Green POL / SikaBit® P-11 SA is a bituminous liquid that seals porous surfaces, such as concrete, which improves the adhesion of bituminous materials that are to be applied to the substrate. P-14 Ultra White POLY Filler / Versatile; fast-set, dimensionally stable; used for filling/fairing porosity & voids on composites’ surfaces
P-14 Ultra White POLY Filler / Versatile; fast-set, dimensionally stable; used for filling/fairing porosity & voids on composites’ surfaces
P-17 White POLY Filler/ High heat-resistant, quick setting, minimal shrinkage, high gloss finish with excellent bond strength
P-17 White POLY Filler/ High heat-resistant, quick setting, minimal shrinkage, high gloss finish with excellent bond strength
1 oz. BPO CAT P14 & P1/ Smooth, creamy filler paste that adheres to fiberglass, smc, RIM, BMC, and advanced composites. Additionally, it will bond to aluminum, steel, and iron if properly prepared.
4 oz. BPO CAT P14, 17 & P1/ Smooth, creamy filler paste that adheres to fiberglass, smc, RIM, BMC, and advanced composites. Additionally, it will bond to aluminum, steel, and iron if properly prepared.
L140 RESIN 46 PAIL/ AdTech Probuild Epoxy System was originally formulated for fiberglass over wood construction. Commonly used by our customers in fiberglass, carbon, and aramid laminates, its thixotropic properties make it ideal for complicated shapes.
L141 Hard Fast F0261
L142 Hard Medium F02610
L143 Hard Slow F0261
822 Fast Hard FMM52438/ Sikalastic®-822 is a 2-part elastic, crack bridging, hand applied polyurethane membrane. Suitable for use in hot and tropical climatic conditions.
822 Fast Hard FMM52458/ Sikalastic®-822 is a 2-part elastic, crack bridging, hand applied polyurethane membrane. Suitable for use in hot and tropical climatic conditions.
823 Hard Medium FMM5243/ Based on a quick-drying, synthetic resinRubber combination. As a connecting layer between Sikalastic®-823 and Mastic asphalt.
823 Hard Medium FMM5245/ Based on a quick-drying, synthetic resinRubber combination. As a connecting layer between Sikalastic®-823 andMastic asphalt
824 Hard Slow FMM524
824 Hard Slow FMM524
861 UltraFair Fairing Hardener/ Compatible with fiberglass, wood, aluminum, steel marine vessels. Fairing compound system. Can be applied up to 1” thick without sagging or shrinking during cure.
861 UltraFair Fairing Hardener/ Compatible with fiberglass, wood, aluminum, steel marine vessels. Fairing compound system. Can be applied up to 1” thick without sagging or shrinking during cure.
77 White High Heat Resistant Gallon/ Polyester filler and fairing compound
Each Description
    F009299
F009433 F011338
F014228 F014238 F017328 F017338 F022290 F024645 F026108
F026110 F026112 F026114 F052529
F052539 F052629 F052639
F053329 F053339 F054339
F054349 F077038
$58.00
$62.85 $115.69
$27.99 $99.99 $29.99
$108.79 $4.45 $10.99 $466.99
$197.99 $197.99 $197.99
$41.59 $152.25 $41.59 $152.29
$41.65 $152.29 $124.29
$186.29 $96.25
                      RESIN & FIBERGLASS PRODUCTS
































   375   376   377   378   379