Page 335 - LMS_Catalog_65

HARDWARE
323
mfr
RECIPROCATING SAW BLADES
All Have a 1/2" Universal Shank
DSW FIG9287
Sterling reciprocating blades are designed to fit all popular machines that take 1/2" universal shank. For superior cutting and breakage resis- tance, the BI-FLEXTM blades are recommended for the toughest applications in all material. BI-FLEXTM blades are manufactured from welded edge, high speed steel. The back of the blade is a shatter resistant, tough alloy tool steel that will bend and flex, but not break.
Blade Type
Ruff Neck/Demolition
Nail Embedded Wood, Demolition, Remodeling
BI-FLEXTM Metal Cutting
Broach Tooth-Varied Pitch White – Long Life – Bi-Metal
Metal/Fiberglass Cutting
Slik-Kote – Long Life – Bi-Metal Metal/Fiberglass Cutting
Slik-Kote – Long Life – Bi-Metal
White – Bi-Metal Scroll
BI-FLEXTM Metal Cutting
White – Long Life – Bi-Metal
BI-FLEXTM Wood Cutting
White – Bi-Metal
BI-FLEXTM White – Bi-Metal
Hard Abrasive Materials
Fiberglass Cutting
Metals – Scroll
Part No. Per Pack
46190-2 $24.40/2pk.
40418-5 $15.40/5pk. 40840-5*$25.20/5pk.
Length Width Thickness
12" 1" .062
4" 3/4" .035 8" 3/4" .035
Teeth
3
18/14
14/10
Recommended Uses
For lath and plaster, paneling, wall board, wood framing and nails.
Fastest cutting, roughing-in work in wood.
Graduated teeth for fast cuts in metals heavier than 3/32", bar stock, angles, pipe. Also fiberglass, fibre “Transite."
*Recommended uses are heavy gauge metals, compositions, masonite, wood etc.
41666-5 $27.75/5pk. 41679-5 $38.25/5pk.
41668-5 $23.70/5pk. 41670-5 $23.70/5pk.
43114-5 $16.10/5pk.
40610-5 $20.30/5pk.
40414-5 $15.40/5pk.
40614-5 $20.30/5pk. 40618-5 $20.30/5pk.
45906-5 $34.15/5pk. 45106-5 $42.30/5pk.
45110-5 $42.30/5pk.
6" Taper Back .050 6 9" ““ .050 6
6" 3/4" .035 10 6" 3/4" .035 14
3-5/8" 5/16" .035 14
6" 3/4" .035 10
4" 3/4" .035 14
For very abrasive materials, fiber- glass, metals, etc. Special coating resists wear and reduces friction.
For scroll cutting heavy gauge metal, fiberglass and masonite.
For metal decking and roofing and non-ferrous metals.
6" 3/4" .035 6" 3/4" .035
14 For heavy gauge sheet metal, 18 conduit, pipe, tubing, thin
fiberglass, etc.
For thinner sections of wood, plas- tics, metals 1/8" and under where extra blade strength is required.
For metal heavier than 1/8", bar stock, angles, etc. Also rubber, masonite, fiberglass, etc.
9" Taper Back .050 6 12" Taper Back .050 6
12" Taper Back .050 10
General roughing-in work in wood and nail-embedded woods. Fast
6
cutting.
CARBIDE GRIT RECIPROCATING SAW BLADES
51800-1 $47.45/5pk. 8" 3/4" .040
AIR SAW BLADES
Carbide Grit
Enhances cutting capability and increases blade life in hard abra- sive materials such as ceramic tile, fiberglass and slate.
12518-5 $14.70/5pk. 3-5/8" 1/2" .025 18 12524-5 $14.70/5pk. 3-5/8" 1/2" .025 24
For scroll cutting metals lighter than 14 gauge.
For scroll cutting metals lighter than 18 gauge, thin tubing, formed sheet, trim, etc.
SAW BLADES