Page 304 - LMSCatalog21
P. 304

 292
HARDWARE
Triangular Hawse Pipe
Stainless Steel
Stainless Steel Bow Eye
With “Sure Seal"
    mfr
E/P FIG 4680
Made of 304 stainless steel and INCLUDES a closed
 M/H FIG 1751
This polished stainless steel triangular hawse pipe is made for
deck corners. It is 8" L x 4-7/8" W with a 1-5/8" flange depth and pre-drilled for No. 10 fasteners, NOT included. The hole open-
cell silicone gasket and all hardware.
*S.W.L.
4833 lbs.
 ing is 5-1/4"L x 2-7/8"W.
 Part No.
SSDP66349
mfr
Each Finish
$112.20 Stainless Steel
Stainless Steel Hawse Pipe
mfr
Part No.
6128
Each
$54.40
Chain and Rope Deck Pipe
Chrome Brass
FIG 3064
Bow Eye, Keel Plate
16-164-01000
Part No.
16-G165-01000-1
D A
B C
mfr
Each Diam. x Lgth.
$32.35 1/2" x 4-3/4"
Mooring Eyes
E/P FIG 2007
Eye ID
1-5/16"
  ABCD
 1600 21/4" 4 1/8" 11/2" 11/2"
    mfr
 S/D FIG6166
This 316 cast stainless steel hawse pipe is used as a durable grom-
met through surfaces. Eliminates deck and rope chafing when cleats are mounted on a vertical surface inside cockpits. Internal hole diameter 1-1/2"W x 3-3/4"L, Flange is 5-1/2"L x 2-1/2"W x 7/8" deep. Uses 4 No. 10 fasteners.
Part No. Each
328160-1 $33.90 Stainless Steel Hawse Pipe
WHC FIG 6515
This 316 cast stainless steel hawse pipe is used as a durable grom- met through surfaces. Eliminates deck and rope chafing when cleats are mounted on a vertical surface inside cockpits. Internal hole diameter 4"L x 1-7/8"W, flange is 6-1/2"L x 3-3/8"W x 1-1/8"D. Uses 4 No. 10 fasteners.
Made of 304 stainless steel with a 42-1/2° bend. Size: 1/2" x 4-1/2" (7" OA)
Part No.
16-1602-0120
Each *S.W.L.
$25.25 4833 lbs.
 Stainless Steel Watertight U-Bolt
WIC FIG 9646
The watertight rubber collar means no noise, leaking or vibration. The collar is black and assures a tight fit, eliminating the need for
     mfr
 messy silicone sealers in most applications.
Std. *S.W.L. Pkg.
6600 10
16-651-00002
Part No.
6544-1
Each
$43.00
Diam. x Lgth.
5/16" x 3-15/16"
Eye ID
1"
      mfr
WHC
This anoval rope and chain deck pipe is made of chrome-plated brass and uses four No. 10 fasteners, NOT included.
   SPECIFICATIONS
Bolt Diameter:1/2"
 Eye ID: 1-5/16"
 Thread Length: 3-7/16"
 Keel & Adapter Plate Thread: 5/8"–11
 Part No.
S-114
Part No.
S-1320
Each I.D. Flange
$86.65 4" x 2-1/2" 6-1/8" x 4-3/8"
Mooring Bitt
WHC FIG 8809
Made of stainless steel with a 7" cross pin. Countersunk for four 5/16" fasteners, NOT included.
Each Base Height
$107.80 3-3/4" x 4-1/2" 5"
    mfr
mfr
E/P
FIG 2008
Made of 100% stainless steel construction eliminating dissimilar metal corrosion.
BOW EYE, KEEL AND ADAPTER PLATES SOLD SEPARATELY
Part No.
16-164-01000 16-651-00002
Each Description
$23.50 Bow Eye $88.30 Keel Plate
  HAWSE AND DECK PIPES
   302   303   304   305   306