Page 303 - LMS_Catalog_65
P. 303

 HARDWARE
291
 Hi-Impact Nylon Cleats 043340 & 043360
043380 & 043390
S/D FIG 1735
Made from hi-impact, long-lasting nylon with etched finish. Found
Heavy-Duty Lifting Eye Nuts
 Stainless Steel
  Lifting eyes are made of cast 316 stainless steel, for lifting craft with overhead cranes. These lift rings are designed to be attached to threaded stainless rod that is in turn solidly anchored to the keel. They are not designed to lift any boat by attaching them to the deck. Maximum working loads: these figures have been deter- mined on the basis of the load being applied in the direction of the axis of the shank for each eye listed. 6098 takes No. 10 screws. 6099 takes 1/4" screws. Bolt size is 5/8"-11, NOT included.
$33.47 1" Standard Package – 5
mfr
SUN FIG 9512 Part No. Each Thread
S0321-0007 $2.40 1/4"-20 S0321-0008 $2.90 5/16"-18
Ring I.D.
9/16" 3/4" 1" 1-3/16" 1-11/32"
S.W.L.
400 lbs.
800 lbs. 1,320 lbs. 2,100 lbs.
3,900 lbs.
      mfr
S0321-0010 $4.90 S0321-0013 $8.70 S0321-0016 $17.90
3/8"-16 1/2"-13 5/8"-11
 to exceed strength of stainless steel fasteners.
O.A. Part No. Each Length
043340 $2.40 4-1/4" 043360 $3.90 6" 043380 $7.70 8" 043390 $10.00 10"
Rope Size
5/16" 7/16" 5/8" 1"
Ctr. to Ctr. Bolt Holes 1-1/8" 1-1/2" 2-1/4"
3"
Stud Size 3/16" 1/4" 5/16" 5/16"
mfr
S/F FIG 3353 Part No.
3SRT008C3 3SRT010C3 3SRT010F3
PKO FIG 757
Diameter
8-32 10-24 10-32
Each Length
$4.20 36 $10.05 36 $4.90 36
   Standard Package – 25
  Stainless Steel Lifting Ring/Cleats
Due to the many variances that arise,
no guarantee of
actual performance is possible for angular loading.
FIG 6165
Perko Rope Deck Pipe
     mfr
No. 757 is chrome zinc. Features a hinged snap down cover and
 mfr
WHC
use No. 8 fasteners.
Part No.
0757DP0CHR
Each
Rope
Flange
3-3/8"
6008H
S112
 All are made of 316 stainless steel and have hollow bases except 6224 which is a heavy-duty all solid stainless steel cleat.
Hinged Rope Deck Pipe Stainless Steel or Chrome Brass
Threaded Rod
Stainless Steel
    Part No.
6098 6099
mfr
WHC
Each
$59.25 $132.95
Length x Eye
6" x 1-1/8" 7" x 1-1/2"
Ctr. to Ctr. Bolt Holes 1-1/2" 1-7/8"
Maximum Load 4,000 lbs. 5,000 lbs.
mfr
WHC
FIG 8431
   Stainless Steel Yacht Cleats
FIG 6161
Acts as an access lid to anchor chain and rope storage lockers. Cover is hinged and spring loaded to stay shut and eliminate rat- tling. Cover can also be locked in open position for more conve- nient rope insertion or extraction. 6008H is 316 stainless steel. Uses four No. 12 fasteners, NOT included. S112 is a chrome-plated brass hinged rope deck pipe. Use four No. 10 fasteners, NOT included.
 Part No.
S-112 6008H
PKO FIG 752C
Made of chrome-plated cast bronze. Low profile – modern design. Dimensions Overall: 4-1/4"W x 6"L. Dimension Inside: 2-1/8"W x 4-1/8"L. Spigot Length: 1-1/4".
Part No. Each Finish Fastener 0752000CHR $125.37 Chrome 1/4"
Each
$36.05 $119.85
I.D.
1-1/2" 3-7/8" x 2-1/2"
Flange
3" 4-1/8" x 2-7/8"
   Chrome Hawse Hole Pipe
 Part No. Each
6009 $19.35 6010 $40.10 6011 $68.55 6012 $100.00 6224 $317.40
Length Height
6" 1.2"
Ctr. to Ctr. Bolt Holes 2-3/8" 2-7/8"
Fasteners
1/4"
mfr
  8" 1.4"
10" 1.8" 3-7/8" 5/16" 12" 2.1" 3-7/8" 5/16" 15" 3.75" 5" 1/2"
1/4"
   WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
  CLEATS AND LIFTING EYES
   301   302   303   304   305