Page 288 - LMS_Catalog_65
P. 288

 276
HARDWARE
 mfr
MNM FIG4172
0045
Moonlite Stainless Steel Hatch Holders
   0045-3, 0340-1
0115-1
  Moonlite Marine “automatic" Hatch Holders solve the problem of supporting hatches, lazarettes, chart tables, refrigerator lids, etc. in a simple, trouble-free manner. When the hatch is opened, the Hatch Holder automatically assumes its supporting function. Moderate side pressure on the spring allows the hatch to be closed. 0115-1 FIXED POSITION BIG HATCH HOLDERS are ideal for foredeck hatches where sailbags are dragged through or where a wind might catch the hatch and open it beyond its designed limits. Stainless steel spring. Each end (2" x 2-1/8") takes four No. 10 screws. Complete with strain relief cable through center. 0080-1 ADJUSTABLE SMALL HATCH HOLDER looks like No. 0045 except one end slides on a 12" piece of stainless steel track (INCLUDED). Track takes five No. 6 screws. Holder uses No. 6 screws. Complete with strain relief cable through center. Slide INCLUDES a locking nut. 0045, 0045-3 & 0314 FIXED POSITION SMALL HATCH HOLDERS are for use on light hatches, lazarettes, refrigerators, dock boxes, etc. 0045, 0045-3 & 0340-1 all use No. 6 screws. Complete with strain relief cable through center. 0314 uses No. 10 screws.
Part No. Each
0045 $14.45 0045-3 $17.75 0115-1 $86.45 0314 $21.65 0340-1 $20.55
Approx. Support in Lbs.
10
10
100
45
10
Spring Size
7/16" Diameter x 8-1/2" Long 7/16" Diameter x 8-1/2" Long
7/8" Diameter x 11-3/4" Long 9/16" Diameter x 10" Long 7/16" Diameter x 6-1/4" Long
Fittings
Fixed Ends without Cable
Fixed Ends with Cable
Black Anodized Aluminum and Cable Fixed Ends without Cable
Fixed Ends with Cable
Ready Switch
0314
0080-1
       Hatch Springs
  mfr
 mfr
ATM FIG 7465
WHC FIG 6248
Made of 304 stainless steel. Uses No. 8 fasteners, NOT included.
This switch is used to enable or disable a feature when a gas spring is activated. When installed on a gas spring, the switch can be used to activate a light, a buzzer or any other feature you can think of. The switch can be positioned anywhere along the rod and will not compromise the quality or function of the gas spring. Applications include hatches, storage doors, tonneau covers, camper shells, etc. The switch can only be installed on gas springs and dampers with a body diameter of 3/4". Made with heavy-duty black plastic.
Part No. Each
AT-SW $15.85
Electric Hatch Lifts
Part No.
S-0216 S-0217 S-0218
ATM FIG 7734
Each
$30.95 $36.20 $81.90
Spring Diameter
7/16" 9/16" 7/8"
Length
8-1/2" 10" 11-3/4"
   316 Stainless Steel Gas Springs
Nitro Lift
    Hatch Lifts
   mfr
70381
LEN FIG 5301
mfr
These gas springs have anti-corrosive seals, controlled stroke speed and a cushioned stroke for safety and smooth operation. Each gas spring is pressurized with nitrogen gas and contains a small amount of lubricating oil within the cylinder. They are tested for -40° to +400° and are made of all stainless steel with two composite ends. Fits a 10mm ball stud.
PSI Body Rod Extnd. Cmpress. PartNo. Each Lbs. Diam. Diam. Length Length Stroke
625-SSID-6-20# $59.25 20 5/8" 1/4" 15" 9" 6"
 625-SSID-8-40# $64.49 40 5/8" 1/4" 20" 12" 8"
 750-SSID-10-35# $95.45 35 3/4" 5/16" 26" 16" 10
 750-SSID-2-20# $70.72 20 3/4" 5/16" 7-1/2" 5-1/4" 2-1/4"
 750-SSID-3-30# $74.24 30 3/4" 5/16" 10" 7" 3"
 750-SSID-3-40# $74.24 40 3/4" 5/16" 10" 7" 3"
 750-SSID-4-30# $77.76 30 3/4" 5/16" 12" 8" 4"
 750-SSID-6-40# $81.31 40 3/4" 5/16" 15" 9" 6"
 750-SSID-6L-20# $84.86 20 3/4" 5/16" 17" 11" 6"
 750-SSID-8-60# $88.38 60 3/4" 5/16" 20" 12" 8"
 New clear anodized tubing made entirely of non-corrosive materials. The ball screw spins freely when hatch is fully opened or closed elim- inating limit switches and burned out motors. It will not drift, never binds, and runs in sync on dual lift applications. It has powdered metal gears and a stainless steel ram which locks in any position. O-ring sealed at 1,000 PSI. 70381-001 optional stainless steel non-locking slide bracket allows you to pull the hatch open 4" in order to pull pin for access in case of power failure. Complete with two 30" non-ter- minated power leads, Deutsch receptacle(s), and hardware. All are 12V DC and rated at 10 Amps. The actuator extension harnesses are avail- able in lengths of 7’, 14’, 20’, 26’, 32’ and 45’ (Special Order).
ROCKER SWITCH SOLD SEPARATELY
Part No. Each Stroke Extended
20768-001 $473.90 12" 36" 20771-001 $515.00 12" 41" 20774-001 $525.80 16" 45" 70381-001 $64.50 — —
Description
24" Hatchlift Assy. 29" Hatchlift Assy. 29" Hatchlift Assy. S/S Slide Brkt.
   24-Volt – Available on Special Order
 HATCHES HOLDERS

























   286   287   288   289   290