Page 248 - LMS_Catalog_65
P. 248

 236
PUMPS
Handi-Puppy Bilge Pump
Bronze
FIG 4663
Rule® 1500 & 2000 Submersible Bilge Pumps
     WARNING!
MOTOR CAN SPARK EXPLOSION & DEATH
CAN OCCUR.
DO NOT USE WHERE FLAMMABLE VAPORS ARE PRESENT.
FIG 9453
mfr
RUL
Part No.
286
FIG 1977
   This 115-Volt AC pump has a 6’ power supply cord. Has replaceable brushes for extended life. Pump head has female 3/8" IPS. 3/4" nylon male garden hose adapters are provided. It has many appli- cations; washing down decks and docks, water for ship service supplies, pumping out crank-case oil etc. Will produce a suction lift approaching 10’ when dry and up to 20’ when wet. Self-priming and intermittent duty 1/2" HP motor. Weighs 5 lbs.
Part No. Each
02* $116.47 03* $132.03 10* $163.37 10-6UL* $178.65 11* $179.34 12* $178.65 278* $10.18 69 $6.27
Description
12-Volt Pump
24-Volt Pump 2.3 1500 12-Volt Pump 4 2000 12-Volt Pump – UL Listed 7.3 2000 32-Volt Pump 3.1 2000 24-Volt Pump 4.0 2000 Spare Strainer for 1500 & 2000
Strt. Adptr. 1-1/8" to 3/4" or 5/8" Hose
mfr
RUL
02
FIG 9461
10-6UL
69
 mfr
JAB
02 (1500 GPH) has a double insulated motor, 5/16" stainless steel shaft and triple straining system. 10 is a heavy-duty 2000 GPH pump. 1-1/8" OD outlets on all. Height: 6", base diameter: 4-1/4". Ignition protected. 2 lbs.
Amps GPH
4 1500
     Part No.
12210-0003
@ 10’ Head Each Volts GPM
$444.36 115 AC 3.4
  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Rule-Mate Automated Bilge Pumps
With Float Switch, 500 to 2000
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Bilge Pump 1500 &2000 Strainer Base
mfr
RUL
• Applications: 1500 GPH and 2000 GPH • Large Rule Mate Pumps
• Material: Plastic
• Color: Blue
  *
      RM500B
RM800B RM1100B
RM2000A
Each Description
$14.59 Blue Oval Strainer Base for 1500/2000 GPH Pumps
Bilge Pump Automatic Control Kit
FIG 3805
No float to stick or not float. Has a molded neoprene air bell with 3’ flexible excelon air tube which makes installation easier. Is compat- ible with any model or voltage bilge pump. When properly installed the switch is controlled by air pressure in the tube created by the rising bilge level. Switch cuts pump on at about 2-3/4" of bilge and off at about 1" of bilge. If possible, mount air bell 6-12" from pump so switch is not affected by suction of pump. Make electrical con- nections with wire of the same size as used for pump power con- nections. Tube 3/16" ID. Rated 115/230V AC at 15 Amps, 12V DC at 10 Amps, and 24 or 32V DC at 5 Amps.
  This series of bilge pumps is programmed to recognize the dielec- tric constant of water only. In the event of an onboard oil spill, straight motor oil that enters the bilge will not turn the pump on. Has a removable strainer. Size: 4" H x 5" W x 2.5" D. Can be connect- ed to a manual override or lighted switch. Pump requires a 3-way panel switch. RM1500A and RM2000A have a threaded 1" NPSM port which accepts the included 1" and 1-1/8" hose barb ports.
   Part No. Each
RM500B $77.08 RM800B $105.88 RM1100B $122.30 RM1500A $243.68 RM2000A $313.81
Volts
12 DC 12 DC 12 DC 12 DC 12 DC
Amps Outlet GPH
2.2 3/4" 500 3.1 3/4" 800 4.0 1-1/8" 1100 4.8 1-1/8" 1500 8.4 1-1/8" 2000
     WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Rule® Submersible Gold Series Bilge Pumps
      mfr
RUL
04
13A
mfr
GRO
 These pumps have a 5/16" stainless steel shaft, are anti-airlock protected and run silent and vibration-less. They are also ignition protected and have moisture-tight seals. Volts: 12 DC.
Part No.
04 09 13A
Each Amps
$143.98 7.0 $189.82 10.0 $319.60 15.5
Discharge GPH
1-1/8" 1500 1-1/8" 2000 1-1/2" 3700
Part No. Each
Volts
  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
AS-100 $79.99 All
  BILGE PUMPS
5-Year Warranty

















   246   247   248   249   250