Page 189 - LMS_Catalog_65
P. 189

 PLUMBING
177
FIG 8884
    Meet and exceed the ABYC H-27 and ISO 9093-2 Standards
 mfr
FOR
Part No.
906037 906035
mfr
GEM
Flush Head Cockpit Drains
White high strength glass-reinforced Marelon.
Each
$35.95 $49.45
Transom Scupper
Thread Size & Hose I.D. 1-1/2"
2"
FIG 4717
    1/2" Barb x 1/2" NPT
   mfr
SHU
Model# 244-5126. 1/2" NPT x 1/2" Barb. CE.
Part No. Each
Made of 316 stainless steel with a rubber flapper. Outside dimen- sion is 8" x 4" with a 5-1/2" x 2" hole and predrilled for four 1/4"
244-5126
FIG 361
mfr
PKO
$2.17
Flush-Mount Cockpit Drains
fasteners NOT included.
Part No.
845
mfr
SFS
   “For Use with Pipe"
The exterior surface of the flange is machined flat and designed to be countersunk into the hull, resulting in a smooth external fit.
2113
Each
$86.40
Drain Fittings 2108
Inside
5-1/2" x 2"
FIG 8728
2408-22
      Has a chrome-plated cast bronze body and brass screen. The exterior surface of the flange is machined flat to be counter-sunk into the deck.
SR has a chrome-plated brass body with stainless steel basket and adjustable neoprene stopper. For use with Fig. 392 and 393 sinks. JR has a stainless steel body, basket and adjustable neoprene stop- per. For use with Fig. 391 and 392 sinks.
Part No.
0361005CHR 0361007CHR
IPS Each Pipe $72.89 3/4" $75.67 1-1/4"
O.D. Flange 2-1/2" 2-7/8"
Max. Thickness 2-3/8" 2-15/16"
CHROME BRASS Part No. Each
2113 $35.15 2108 $7.95 2408-22 $10.60
FIG 8875
907013 Straight
TAIL PIECE (2408-22) SOLD SEPARATELY
 WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Sink/Tail piece Opening 3-1/2"
2"
1-1/2"
Drain Fittings
Description
Large Drain Fitting Small Drain Fitting 8" Long Tail Piece
907022 Straight
    FIG 4719
89522
Low-Profile Drain
     mfr
GEM
 Drain cap is made of 316 stainless steel with a silicone gasket for use in restricted areas. Body is made of nylon.
Part No.
89522 HA150
FIG 9660
mfr
M/E
Each
$103.35 $12.70
Hose Size
1-1/2" 1-1/2"
Description
1-1/2" Low-Profile Drain 1-1/2" Hose Adapter
HA150
   “L" Shape Thru-Hulls
  New L-shaped flange allows total compartment drainage. Thin walls for maximum flow. All are durable and UV-stabilized. Lock nut
All drains are straight except SW4 which is 90°. These drains are designed for 1" and 3/4" tubing. Models SW4, SW6 and SW7 are bright chrome-plated, non-corrosive plastic. SW5 is all white plastic and can be used as a drain fitting or a replacement tail piece for SW7.
INCLUDED.
Part No.
7040W 6540W 6710W
Each
$5.80
$9.75 $13.45
Hose Size
3/4" 1-1/8" 1-1/2"
Type
Straight Straight Straight
Thread Length
1-1/2" 1-7/8" 2-7/8"
Part No. Each
907017 $36.95 907013 $9.45 907022 $31.84 907027 $29.13
Tubing I.D. Opening
1" 2" 3/4" 1-1/4" 1" 2"
3/4" 2"
Drain Flange 2-7/8" 1-3/4" 2-7/8" 2-7/8"
OD Tail Piece 90° Straight Straight Straight
mfr
FOR
      DRAIN/FRESHWATER INLET
   187   188   189   190   191