Page 143 - LMSCatalog21
P. 143

 PLUMBING
131
  FIG 1548
00VL150
mfr
B/A
Part No.
00VL150 00VL75 60VL75CV
Bronze Vented Loop
Vented Loops
   Each
$115.10 $65.00 $14.55
I.D.
Width
3101 3131
mfr
FOR
Each Vent Loop
$24.55 3/4" Vented Loop with 1/4" Barb $30.25 1-1/2" Vented Loop with 1/4" Barb
Vented Loops
FIG 9625
60VL75CV
Height
1-1/2"
3/4"
3/4" Microcheck Valve for 00VL75
mfr
M/E
FIG 9475
Loops are molded black plastic for durability and trouble-free operation. Inside of loop is smooth for better flow.
Part No.
 7.0" 2-1/4"
6-1/4" 2-1/2"
    mfr
Part No. Each
903001 $32.95 903007 $47.45 903018 $54.95 903000 $36.95
O.D.
3/4" with Valve 1" with Valve 1-1/8" with Valve 1-1/2" with Valve
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Vented Loops
Virtually Clog-Free
Made of black non-corrosive material.
Install in inlet and discharge plumbing
and position so they remain approxi-
mately eight inches above the waterline
at any angle of heel or trim. The one-way valve in the vent fitting allows air into the loop when a vacuum is present caused by a siphon condition and closes when under pressure.
     GRO FIG 9246
  All bronze with mounting tabs for easy installation. The oversized vent valve is virtually clog-free and can easily be removed with- out tools for inspection or cleaning by unscrewing the threaded cap. The cap has 1/2" IPS thread for optional overboard venting. Mounting hardware INCLUDED.
Discharge Vented Loop
mfr
JAB
Connections: for 38mm (1-1/2") bore hose. Dimensions: 11/2"- 120mm high, 195mm wide 45mm deep.
Part No. Each
29015-0010 $46.17 Vented Loops
316 Stainless Steel
FIG 1360
The 20013 Marine Vented Loop provides a proven way to break the vacuum in marine water systems. Bank siphonage will be broken if the loop is approximately two feet above water level. The Vacuum Breaker has a normally closed poppet which keeps vent line fumes from the vessel. The breaker is designed for a corrosion proof ser- vice life with a protected air vent. All of the parts exposed to liquid are manufactured from Delrin. The Sensitive Breaker - automatically opens and prevents back siphoning. Normally closed - two feet of water vacuum will cause breaker poppet to open. The External Stainless Steel Spring is not in liquid. Has a protective dust cover. Use for Heads, Bilge Pumps, Shower Pumps, and Engine Exhaust Lines.
    Part No.
HVL1000 HVL1500 VL1504
    PLEASE NOTE WHEN SHIPPING UPS: PORCELAIN DAMAGE IS THE CUSTOMER’S RESPONSIBILITY
   mfr
JAB
Each O.D.
$149.99 1" Hose $177.48 1-1/2" Hose
$49.99 Spare Valve for All
Stocked Jabsco Toilet Parts
FIG 1728
 Part No. Each Description
6342-0000 $4.67 Slinger
 29040-3000* $118.93 Pump Assy.
 29041-1000 $51.77 Base Assembly for 29090-5000
 29042-0000 $15.20 Top Valve Gasket for 29090-5000 & 29120-5000
 29043-0000 $21.28 Flap Valve Gasket Base
 29044-2000* $15.30 Seal Assembly for 29090-5000 1997-2007
 29044-3000* $15.75 Seal Assembly for 29090-5000 for 2008+
 29045-0000* $87.87 Major Repair Kit for 29090 / 29120- 5000(1997 and before)
 29045-2000* $86.19 Major Repair Kit for 29090 / 29120-5000 (1998 to 2007)
 29045-3000* $86.19 Major Repair Kit for 29090 / 29120-5000 (2008 to Date)
 29046-3000* $31.16 Piston Rod & Drum
 29047-0000* $24.53 Bowl Installation Kit
 29072-1000 $7.47 Base Gasket for 29100
 29092-1000 $13.71 Joker Valve
 29098-1000 $9.77 Seat Hinge Set
 29101-0000* $85.73 Service Kit for 29200
 37040-0000* $65.30 Repair Kit for 37010-Series Toilets
 37064-0000* $189.35 Motor 12 Volt DC
 43990-0066* $4.11 Square O-Ring Kit
 44106-1000 $9.14 Joker Valve for 37010-3092, 37010- 4092, 37018-0000, 43990-0066
 44107-1000 $8.50 1" Discharge Port
 58107-1000* $28.55 Intake Elbow & Seal Kit
 90197-0000* $22.10 Service Kit for 37245-4092
  mfr
SCT
Part No.
913-VL 06 913-VL 07 913-VL 11 913-VL 15
Each Size
$103.05 5/8 $106.60 3/4
  $120.75
$152.75 1-1/2
1-1/8
  *
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
 TOILETS & PARTS
   141   142   143   144   145