Page 78 - byob-catalog

76
ABRASIVES & CONSUMABLES
Multi-Mode Sander ROTEX RO 150 FEQ-Plus
mfr
FES
The Rotex RO 150 can switch
between three different modes:
coarse sanding, fine sanding,
and polishing. The dual-mode
sanding feature enables the RO
150 sander to aggressively and
rapidly remove material. Backed
by 720 watts of power, the
toughest tasks like sanding off
old paint and varnish, polishing mineral materials, or sanding steps are effortless. The long-life, easily changeable pads provide a tool- free option so there are minimum interruptions when adapting to different sanding surfaces.
Part No. Each
576028 $700.00
Random Orbital Sander
Dust Extractor CLEANTEC CT 26 E HEPA
Festool HEPA Certified Dust Extractor CT 26 E is equipped with tool-triggered auto start func- tionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool.
Part No. Each mfr 574930 $822.22 FES
Dust Extractor CT MIDI I HEPA
The CT MIDI I features huge suction power inside of a machine that is compact enough to easily move and store. By reducing your cleanup work and integrating with the Fes- tool system, this CT Dust Extractor helps you do more work in less time. The CT MINI/MIDI I carries full-unit HEPA certification and is OSHA compliant*.
mfr
FES
ETS EC150/3 EQ-Plus
Part No. Each
Perfectly built for manual operation. For reduced fatigue when carrying out overhead sanding work and a good feeling on edges, as well as convenient operation in any position. The new ETS EC 150 EQ. At just 4 1/2" (116 mm) high and with a brushless EC-TEC motor and ergonomic hous- ing geometry with perfectly balanced center of gravity.
574837 $711.11
Dust Extractor CLEANTEC CT 36 E HEPA
mfr
FES
Festool HEPA Certified Dust Extractor CT 36 E incorporates dust control which is an integral part of the Festool system and design philos- ophy. That is why the CT 36 is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied out- let socket, the vacuum cycles with the tool.
Part No. Each
576326 $583.33
FES
Part No.
574935
Each mfr $888.89 FES
Random Orbital Sander DTS 400 REQ-Plus
Great all around sander, the DTS 400 is designed for fine sanding small, angular surfaces that are difficult to reach. With a short 5/64" (2 mm) stroke, this sander gives you a super-
fine finished surface. Both compact and lightweight (2.4 lbs), the DTS 400 is the ideal sander for working on vertical and overhead surfaces. Step-less variable speed improves working results and the vibration-stop balancing makes your work less tiring.
Part No. Each
576061 $311.11
Multi-Mode Sander
Dust Extractor CLEANTEC CT 15 HEPA
Ideal for cleaning on construction sites, pro- duction shop, or the home workshop: With a 3.96-gallon (15 Liter) container colume, the CLEANTEC CT 15 extracts dust, dirt, and water. Its design ensures that almost the entire con- tainer colume can be used—for long periods of work without having to change the filter bag.
mfr
Part No.
574831
Each mfr $387.78 FES
ETS EC 150/5 EQ-Plus
Finish Orbital Sander RTS 400 REQ-Plus
mfr
FES
Great all around sander,
the RTS 400 is designed
for fine sanding small,
angular surfaces that are
difficult to reach. With
a short 5/64" (2 mm)
stroke, this sander gives
you a super-fine finished
surface. Both compact and lightweight (2.4 lbs), the RTS 400 is the ideal sander for working on vertical and overhead surfaces. Step-less variable speed improves working results and the vibration-stop bal- ancing makes your work less tiring.
Part No. Each
576054 $311.11
mfr
FES
Perfectly built for manual oper-
ation. For reduced fatigue when
carrying out overhead sanding
work and a good feeling on edges,
as well as convenient operation in
any position. The new ETS EC 150.
At just 4 1/2" (116 mm) high and with a brushless EC-TEC motor and ergonomic housing geometry with perfectly balanced center of gravity. Part No. Each
576339 $583.33
FESTOOL