Page 72 - byob-catalog

70
GENERAL MAINTENANCE
Permatex® Ultra Black® Maximum Oil Resistance RTV Silicone Gasket Maker
Permatex® 5 Minute Gel Epoxy
Permatex® Bearing Mount for Worn Parts
mfr
Permatex® Super Glue Gel
mfr
PER
mfr
PER
Fast-curing formula. Sensor-safe, low odor, non- corrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant prop- erties through use of a patented adhesion system.
mfr
PER
Permatex’s General Purpose 5 Minute Gel Epoxy provides the flexibility to reposition before the setting time. The fast setting, two-part adhesive and filler system is specially formulated with a Blue Dye Indicator that disappears when it’s fully mixed and ready to use. The advanced gel for- mulation reduces mess and waste compared to traditional epoxies; unique indicator system takes the guesswork out of “ready to use”.
Each Size Case
$5.15 .84 fl. oz. dual syringe 6
PER
Permatex Bearing Mount for Worn Parts is a creamy, non-running adhesive used to repair large gaps and severely worn parts. With a very rapid cure, this for- mula fills gaps to .020 inches in diameter and adds up to 3,000 PSI holding power. Use to 300 degrees Fahrenheit. Suggested applications include refitting worn shafts, housings and couplings; repairing worn keyways and loose set screws.
Part No. Each Size
20297 $12.46 6 ml Tube
Permatex® Copper Spray-A-Gasket® Hi-Temp Sealant
Part No.
82180
Each Size Case
$7.36 3.35 oz. tube 12
Permatex® Super Glue
PER
This formulation was specially designed for a faster, long-lasting bond. It is easily applied and works on nonporous materials including metal, plastics, rubber, vinyl, paper, wood, and textiles. Permanent, transparent bond fills gaps to .004”
Part No.
84101
mfr
Part No.
82190
Each Size Case
$2.07 2 g tube 12
This no drip gel formula “stays put” for precise application on hard-to-reach, overhead, or ver- tical surfaces. This permanent, transparent bond is easily applied and works on both porous and nonporous materials including metal, rubber, glass, aluminum, vinyl, ceramics, alloys, and plastics. Fills gaps to .004”
mfr
Part No.
82191
Each Size Case
$3.19 2 g tube 12
PER
Fast-drying, metallic copper sealant helps dissipate heat, prevents gasket burnout and improves heat transfer. Fills minor surface irregularities. Seals instantly. Fills hot spots and surface imperfections. Temperature range -50°F to 500°F (-45°C to 260°C); resists all types of automotive flu- ids, especially gasoline. Level 3
Part No. Each Size Case
Permatex® Ultra SlickTM Engine Assembly Lube
PER
Proper lubrication of metal mating surfaces is essential prior to starting a new or rebuilt engine. Ultra SlickTM adheres to component surfaces to prevent scuffing and galling during initial start-up. This high quality for- mulation meets or exceeds OEM performance specs for engine assembly lubricants.
Part No. Each Size
81950 $6.52 4 oz. bottle Permatex® Nickel Anti-Seize Lubricant
mfr
PER
Protects metal parts from seizing and galling at tem- peratures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature, and with stainless steel, titanium and nickel alloys.
Part No. Each Size
77124 $33.46 8 oz. brush-top bottle
80696
mfr
PER
An all-purpose, pressure sensitive, spray adhesive that allows both permanent and repositionable bonding. Won't bleed through leaving surfaces unstained, dries clear. Unique formula resists water and humidity. Will not shrink. Adheres to porous and nonporous materials. Part No. Each Size
82019 $11.48 16 oz. aerosol can
Permatex® Anti-seize Lubricant
mfr
PER
A highly refined blend of aluminum, copper and graph- ite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly.
Part No. Each Size
80078 $11.06 8 oz. brush-top bottle
mfr
$4.62 12 oz. aerosol can 12
Permatex® All Purpose Spray Adhesive
THREADLOCKED & ANTI-SEIZE